Wpływ spoiwa mieszanego na właściwości recyklowanej mieszanki mineralno-asfaltowej z asfaltem spienionym w aspekcie jej uziarnienia

Marek Iwański; Grzegorz Mazurek; Anna Chomicz-Kowalska; Przemysław Buczyński; Małgorzata Cholewińska; Mateusz Marek Iwański; Krzysztof Maciejewski; Piotr Ramiączek

doi:10.7409/rabdim.023.005

Published: 2023-03-31

Vol. 22 No. 1 (2023)

Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen

Marek Iwański , Grzegorz Mazurek , Anna Chomicz-Kowalska , Przemysław Buczyński , Małgorzata Cholewińska , Mateusz Marek Iwański , Krzysztof Maciejewski , Piotr Ramiączek

Section: Articles

https://doi.org/10.7409/rabdim.023.005

Abstract

Developments in reconstruction of roads of all categories – from motorways to local roads – result in production of large quantities of reclaimed asphalt pavement (RAP) material of various quality and grading. In a sustainable economy, it is necessary to recycle such materials. Currently RAP is primarily reused in recycled mixtures dedicated for road base courses. Variable quality of RAP material requires application of appropriate binding agents to optimize the performance of the obtained mixtures. There is a need for dedicated three-component hydraulic binder, consisting of CEM I 32.R cement, hydrated lime Ca(OH)₂ and cement by-pass dust (CBPD), whose proportions should be adopted adequately to the intended use. The influence of hydraulic binder composition was investigated for the following parameters of the obtained mixture with foamed bitumen: air voids, indirect tensile strength, uniaxial compressive strength, resistance to water and frost (according to four different parameters) and stiffness moduli at -10°C, +13°C, +25°C and +40°C in accordance with the IT-CY method. The recommended composition of the three-component binder providing the required properties of cold-recycled mixture with hydraulic binder and foamed bitumen was determined based on the obtained test results.

Keywords:

cold-recycled asphalt mixture, foamed bitumen, mixed hydraulic binder, reclaimed asphalt pavement.

Most read articles by the same author(s)

Mateusz Marek Iwański, Małgorzata Linek, Piotr Nita, Patrycja Piotrowska, Eva Remišová, Assessment of suitability of reclaimed asphalt pavement material for use in cement concrete pavements , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 1 (2023)
Marek Iwański, Grzegorz Mazurek, Hydrated lime effect on rutting resistance of SMA pavements , Roads and Bridges - Drogi i Mosty: Vol. 12 No. 4 (2013)
Marek Iwański, Grzegorz Mazurek, Synthetic wax effect on the resilient stiffness modulus of asphalt concrete , Roads and Bridges - Drogi i Mosty: Vol. 11 No. 3 (2012)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Renata Horodecka, Influence of a three-component hydraulic binder on the properties of recycled base course with foamed bitumen and bituminous emulsion: a field investigation , Roads and Bridges - Drogi i Mosty: Vol. 21 No. 4 (2022)
Przemysław Buczyński, Grzegorz Mazurek, Marek Iwański, Predicting the properties of a mixture produced using “cold” technology with foamed bitumen in terms of the properties of hydraulic binder mortars , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Artur Kowalczyk, Marcin Podsiadło, Prediction of irreversible susceptibility and elastic recurrence of asphalts modified with waste plastomers in MSCR study , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)
Piotr Ramiączek, Mikołaj Cielibała, Natalia Skrzyniarz, Karolina Janus, Krzysztof Maciejewski, Mateusz M. Iwański, Anna Chomicz-Kowalska, Influence of the type of recycled asphalt pavement on the properties of the SMA JENA 16 stone mastic asphalt mixture , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)

Download files

PDF (Język Polski)

Citation rules

Iwański, M., Mazurek, G., Chomicz-Kowalska, A., Buczyński, P., Cholewińska, M., Iwański, M. M., … Ramiączek, P. (2023). Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen. Roads and Bridges - Drogi I Mosty, 22(1), 81–114. https://doi.org/10.7409/rabdim.023.005

Cited by / Share

References

Sybilski D., Matras J., Mechowski T., Zawadzki J.: Warunki techniczne wykonywania warstw podbudowy z mieszanki mineralno cementowo-emulsyjnej (MCE). IBDiM, Seria „I”, 61, 1999
Google Scholar

Jenkins K.J.: Mix Design Considerations for Cold and Half-Warm Bituminous Mixes with Emphasis on Foamed Bitumen. University of Stellenbosch, Department of Civil Engineering, Faculty of Engineering, PhD Dissertation, 2000
Google Scholar

Jaczewski M., Dołżycki B., Alenowicz J., Jaskuła P.: Impact of reclaimed asphalt pavement (RAP) on low-temperature properties of asphalt concrete. Roads and Bridges - Drogi i Mosty, 18, 4, 2019, 303-315, DOI: 10.7409/rabdim.019.020
Google Scholar

Zawadzki J., Kłos M.: Zasady projektowania betonu asfaltowego o zwiększonej odporności na odkształcenia trwałe. Wytyczne oznaczania odkształcenia i modułu sztywności mieszanek mineralno-bitumicznych metodą pełzania pod obciążeniem statycznym. IBDiM, seria „I”, 34, 1995
Google Scholar

Dołżycki B.: Instrukcja projektowania i wbudowania mieszanek mineralno-cementowo-emulsyjnych (MCE). Politechnika Gdańska, 2014
Google Scholar

Iwański M.M.: Synergistic Effect of F–T Synthetic Wax and Surface-Active Agent Content on the Properties and Foaming Characteristics of Bitumen 50/70. Materials, 14, 300, 2021, DOI: 10.3390/ma14020300
Google Scholar

Sanchez-Alonso E., Vega-Zamanillo A., Castro-Fresno D., Del Rio-Prat M.: Evaluation of compatibility and mechanical properties of bituminous mixes with warm additives. Construction and Building Materials, 25, 2011, 2304–2311
Google Scholar

Iwański M.M., Chomicz-Kowalska A., Maciejewski K.: Impact of Additives on the Foamability of a Road Paving Bitumen. IOP Conference Series: Materials Science Engineering, 603, 2019, ID article: 042040, DOI: 10.1088/1757-899X/603/4/042040
Google Scholar

Leng Z. Gamez A. Al-Qadi I.L.: Mechanical property characterization of warm-mix asphalt prepared with chemical additives. Journal of Materials in Civil Engineering, 26, 2, 2014, 304–311, DOI: 10.1061/(ASCE)MT.1943-5533.0000810
Google Scholar

Technical Guideline TG2: Bitumen Stabilised Materials. A Guideline for the Design and Construction of Bitumen Emulsion and Foamed Bitumen Stabilised Materials, Asphalt Academy, 2nd ed. Pretoria, South Africa, 2009
Google Scholar

Buczyński P., Iwański M.: Inactive Mineral Filler as a Stiffness Modulus Regulator in Foamed Bitumen-Modified Recycled Base Layers. IOP Conference Series: Materials Science and Engineering, 245, 3, 2017, 032042, DOI: 10.1088/1757-899X/245/3/032042
Google Scholar

Mazurek G., Iwański M., Buczyński P., Horodecka R.: Influence of innovative three-element binder on permanent deformations in recycled mixtures with emulsion and foamed bitumen. Archives of Civil and Mechanical Engineering, 21, 55, 2021, 236-261, DOI: 10.1007/s43452-021-00192-9
Google Scholar

Cold Recycling Technology. Wirtgen Group, First edition, Wirtgen GmbH, Windhagen, 2012
Google Scholar

Iwański M., Chomicz-Kowalska A.: Evaluation of the effect of using foamed bitumen and bitumen emulsion in cold recycling technology, in: Losa M., Papagiannakis T. (Eds.), Sustainability, Eco-Efficiency, and Conservation in Transportation Infrastructure Asset Management. CRC Press, 2014, 69–76, DOI: 10.1201/b16730-12
Google Scholar

Dołżycki B.: Polish experience with cold in-place recycling. IOP Conference Series: Materials Science and Engineering, 236, 2017, ID article: 012089, DOI: 10.1088/1757-899X/236/1/012089
Google Scholar

Bessa I.S., Almeida L.R., Vasconcelos K.L., Bernucci L.L.B.: Design of cold recycled mixes with asphalt emulsion and portland cement. Canadian Journal of Civil Engineering, 43, 9, 2016, 773–782, DOI: 10.1139/cjce-2016-0111
Google Scholar

Raport z projektu TECHMATSTRATEG1/349326/9/NCBR/2017 „Innowacyjna technologia wykorzystująca optymalizację środka wiążącego przeznaczonego do recyklingu głębokiego na zimno konstrukcji nawierzchni zapewniająca jej trwałość eksploatacyjną". NCBR, 2018
Google Scholar

Jenkins K.J., de Groot J.L.A., van de Ven M.F.C., Molenaar A.: Half-warm foamed bitumen treatment, a new process. Proceedings of the 7th Conference on asphalt pavements for Southern Africa. Capsa, 1999
Google Scholar

Kowalski K.J., Król J.B., Bańkowski W., Radziszewski P., Sarnowski M.: Thermal and Fatigue Evaluation of Asphalt Mixtures Containing RAP Treated with a Bio-Agent. Applied Sciences, 7, 3, 2017, ID article: 216, DOI: 10.3390/app7030216
Google Scholar

Iwański M., Chomicz-Kowalska A., Maciejewski K.: The Influence of Hydrated Lime on IT-CY Stiffness Modulus of Foam-Based Asphalt Concrete Compacted at 95 °C. IOP Conference Series: Materials Science and Engineering, 471, 2019, ID article: 032029, DOI: 10.1088/1757-899X/471/3/032029
Google Scholar

Jamshidi A., White G.: Evaluation of Performance and Challenges of Use of Waste Materials in Pavement Construction: A Critical Review. Applied Sciences, 10, 1, 2019, ID article: 226, DOI: 10.3390/app10010226
Google Scholar

Mallick R.B., Hendrix G.: Use of foamed asphalt in recycling incinerator ash for construction of stabilized base course. Resources, Conservation and Recycling, 42, 3, 2004, 239–248, DOI: 10.1016/j.resconrec.2004.04.007
Google Scholar

Ramanujam J.M., Jones J.D.: Characterization of foamed-bitumen stabilisation. International Journal of Pavement Engineering, 8, 2, 2007, 111–122, DOI: 10.1080/10298430601149676
Google Scholar

Skotnicki L., Kuźniewski J., Szydło A.: Stiffness Identification of Foamed Asphalt Mixtures with Cement, Evaluated in Laboratory and In Situ in Road Pavements. Materials, 13, 5, 2020, ID article: 1128, DOI: 10.3390/ma13051128
Google Scholar

Lin J., Hong J., Xiao Y.: Dynamic characteristics of 100% cold recycled asphalt mixture using asphalt emulsion and cement. Journal of Cleaner Production, 156, 2017, 337–344, DOI: 10.1016/j.jclepro.2017.04.065
Google Scholar

Katalog Typowych Konstrukcji Nawierzchni Podatnych i Półsztywnych). GDDKiA, Warszawa, 2014
Google Scholar

Kavussi A., Modarres A.: Laboratory fatigue models for recycled mixes with bitumen emulsion and cement. Construction and Building Materials, 24, 10, 2021, 1920–1927, DOI: 10.1016/j.conbuildmat.2010.04.009
Google Scholar

Niazi Y., Jalili M.: Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23, 3, 2009, 1338–1343, DOI: 10.1016/j.conbuildmat.2008.07.020
Google Scholar

Mazurek G., Buczyński P., Iwański M., Horodecka R.: Influence of a three-component hydraulic binder on the properties of recycled base course with foamed bitumen and bituminous emulsion: a field investigation. Roads and Bridges - Drogi i Mosty, 21, 4, 2022, 309-329, DOI: 10.7409/rabdim.022.018
Google Scholar

Iwański M.M.: Effect of Hydrated Lime on Indirect Tensile Stiffness Modulus of Asphalt Concrete Produced in Half-Warm Mix Technology. Materials, 13, 21, 2020, ID article: 4731, DOI: 10.3390/ma13214731
Google Scholar

Judycki J., Jaskuła P.: Badania odporności betonu asfaltowego zawierającego wapno hydratyzowane na działanie wody i mrozu. Materiały konferencyjne V Międzynarodowej Konferencji „Trwałe i Bezpieczne Nawierzchnie Drogowe", 5 maja 1999, Kielce, 111–118
Google Scholar

Luxemburk G.F.: Lime Hydrate as an Additive to Improve the Adhesion of Bitumen to the Aggregates. Proceedings of the II International Conference "Durable and Save Road Pavements", 15-16 May, Kielce, 1996, 296–302
Google Scholar

Lesueur D., Petit J., Ritter, H.J.: The mechanisms of hydrated lime modification of asphalt mixtures: A state-of-the-art review. Road Materials and Pavement Design, 14, 1, 2013, 1-16, DOI: 10.1080/14680629.2012.743669
Google Scholar

Stroup-Gardiner M. Epps J.A.: Four variables that affect the performance of lime in asphalt aggregate mixtures. Transportation Research Record, 1115, 1987, 12–22
Google Scholar

Iwański M., Mazurek G., Buczyński P., Iwański M.M.: Effects of hydraulic binder composition on the rheological characteristics of recycled mixtures with foamed bitumen for full depth reclamation, Construction and Building Materials, 330, 2022, ID article: 127274, DOI: 10.1016/j.conbuildmat.2022.127274
Google Scholar

Czapik P., Zapała-Sławeta J., Owsiak Z., Stępień P.: Hydration of cement by-pass dust. Construction and Building Materials, 231, 2020, ID article: 117139, DOI: 10.1016/j.conbuildmat.2019.117139
Google Scholar

Owsiak Z., Czapik P., Zapała-Sławeta J.: Properties of a Three-Component Mineral Road Binder for Deep-Cold Recycling Technology. Materials, 13, 16, 2020, ID article: 3585, DOI: 10.3390/ma13163585
Google Scholar

Iwański M., Chomicz-Kowalska A., Mazurek G., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Effects of the Water-Based Foaming Process on the Basic and Rheological Properties of Bitumen 70/100. Materials, 14, 11, 2021, ID article: 2803, DOI: 10.3390/ma13163585
Google Scholar

Lazić Ž.R.: Design of experiments in chemical engineering: a practical guide. Wiley-VCH, Weinheim, 2004
Google Scholar

STATISTICA 13.3. Statsoft. Available online: www.statsoft.com (20.08.2019)
Google Scholar