Efekt oddziaływania wosku syntetycznego i środka powierzchniowo czynnego na starzenie oraz właściwości niskotemperaturowe asfaltu 50/70 przed i po spienianiu

Mateusz Iwański; Małgorzata Durlej; Karolina Janus; Renata Horodecka

doi:10.7409/rabdim.024.015

Published: 2024-10-30

Vol. 23 No. 3 (2024)

The effect of synthetic wax and surface-active agent on the aging and low-temperature properties of 50/70 bitumen before and after foaming

Mateusz Iwański

, Małgorzata Durlej

, Karolina Janus

, Renata Horodecka

Section: Articles

https://doi.org/10.7409/rabdim.024.015

Abstract

Service life of an asphalt mixture is significantly affected by the bitumen, whose properties are prone to change due to aging. The presented research was focused on the effect of synthetic wax and surface-active agent on the aging of 50/70 bitumen. Synthetic wax was added to the bitumen to reach the content levels of 1.0%, 1.5%, 2.0% and 2.5% (by mass); surface-active agent was added at the content levels of 0.2%, 0.4% and 0.6% (by mass). The influence of the two additives was investigated both before and after the foaming process. The analyzed parameters included the change in penetration at 25°C, softening point and Fraass breaking point after shortterm (technological) and long-term (in-service) aging. Low-temperature parameters of the binder (stiffness modulus and creep slope) were also determined. Significant influence of additives on the aging process of the 50/70 bitumen was noted; however, its intensity varied. The disadvantageous influence on aging was more pronounced for synthetic wax than for surface-active agent. Addition of synthetic wax to the 50/70 bitumen before foaming affected the foaming process characteristics more intensively than the addition of surface-active agent. Similar relationships were noted in the case of binder low-temperature properties.

Keywords:

foamed bitumen, in-service aging, surface active agent, synthetic wax, technological aging

Most read articles by the same author(s)

Wojciech Bańkowski, Renata Horodecka, Marcin Gajewski, Krzysztof Mirski, The extended assessment of warm mix asphalts durability , Roads and Bridges - Drogi i Mosty: Vol. 15 No. 2 (2016)
Marcin Gajewski, Renata Horodecka, Rheological properties of road bitumens modified by natural asphalt , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 2 (2018)
Piotr Ramiączek, Mikołaj Cielibała, Natalia Skrzyniarz, Karolina Janus, Krzysztof Maciejewski, Mateusz M. Iwański, Anna Chomicz-Kowalska, Influence of the type of recycled asphalt pavement on the properties of the SMA JENA 16 stone mastic asphalt mixture , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Renata Horodecka, Influence of a three-component hydraulic binder on the properties of recycled base course with foamed bitumen and bituminous emulsion: a field investigation , Roads and Bridges - Drogi i Mosty: Vol. 21 No. 4 (2022)
Marcin Gajewski, Renata Horodecka, Wojciech Bańkowski, Aleksandra Grzegórska, Maciej Kłopociński, Evaluation of the effect of processed plastic additives on the properties of paving grade bitumen , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 3 (2023)

Download files

PDF

Citation rules

Iwański, M., Durlej, M., Janus, K., & Horodecka, R. (2024). The effect of synthetic wax and surface-active agent on the aging and low-temperature properties of 50/70 bitumen before and after foaming. Roads and Bridges - Drogi I Mosty, 23(3), 311–329. https://doi.org/10.7409/rabdim.024.015

Cited by / Share

Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Piłat J., Radziszewski P.: Nawierzchnie Asfaltowe. Wydawnictwa Komunikacji i Łączności, Warszawa, 2010
Google Scholar

Stefańczyk B., Mieczkowski P.: Mieszanki Mineralno-Asfaltowe: Wykonawstwo i Badania. Wydawnictwa Komunikacji i Łączności, Warszawa, 2008
Google Scholar

Silva H.M.R.D., Oliveira J.R.M., Peralta J., Zoorob S.E.: Optimization of warm mix asphalt using different blends of binders and synthetic paraffin wax contents. Construction and Building Materials. 24, 9, 2010, 1621-1631, DOI: 10.1016/j.conbuildmat.2010.02.030 DOI: https://doi.org/10.1016/j.conbuildmat.2010.02.030
Google Scholar

Leng Z., Gamez A., Al-Qadi I.L.: Mechanical property characterization of warm-mix asphalt prepared with chemical additives. Journal of Materials in Civil Engineering, 26, 2, 2014, 304-311, DOI: 10.1061/(ASCE)MT.1943-5533.0000810 DOI: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000810
Google Scholar

Sanchez-Alonso E., Vega-Zamanillo A., Castro-Fresno D.,
Google Scholar

DelRio-Prat M.: Evaluation of compactability and mechanical properties of bituminous mixes with warm additives. Construction and Building Materials, 25, 2011, 2304-2311, DOI: 10.1016/j.conbuildmat.2010.11.024 DOI: https://doi.org/10.1016/j.conbuildmat.2010.11.024
Google Scholar

Zaumanis M., Mallick R.B., Frank R.: Use of Rejuvenators for Production of Sustainable High Content Rap Hot Mix Asphalt. In: Proceedings of the 28th International Baltic Road Conference, Vilnius, Lithuania, 26–28 August 2013, Baltic Road Association, Vilnius, 2013, 1–10
Google Scholar

Malinowski S., Woszuk A., Wróbel M., Kwaśniewska A., Gładyszewski G., Skultecke J., Vaitkus A., Franus W.: Anti-ageing and rheological performance of bitumen modified with polyaniline nanofibers. Construction and Building Materials, 437, 2024, ID article: 136810, DOI: 10.1016/j.conbuildmat.2024.136810 DOI: https://doi.org/10.1016/j.conbuildmat.2024.136810
Google Scholar

Iwański M., Chomicz-Kowalska A., Maciejewski K., Iwański M.M., Radziszewski P., Liphardt A., Król J.B., Sarnowski M., Kowalski K.J., Pokorski P.: Effects of Laboratory Ageing on the FTIR Measurements of Water-Foamed Bio-Fluxed Asphalt Binders. Materials, 16, 2, 2023, ID article: 513, DOI: 10.3390/ma16020513 DOI: https://doi.org/10.3390/ma16020513
Google Scholar

Nizamuddin S., Baloch H.A., Jamal M., Madapusi S.,
Google Scholar

Giustozzi F.: Performance of waste plastic bio-oil as a rejuvenator for asphalt binder. Science of The Total Environment, 828, 2022, ID article: 154489, DOI: 10.1016/j.scitotenv.2022.154489 DOI: https://doi.org/10.1016/j.scitotenv.2022.154489
Google Scholar

Zhang Z., Fang Y., Yang J., Li X.: A comprehensive review of bio-oil, bio-binder and bio-asphalt materials: Their source, composition, preparation and performance. Journal of Traffic and Transportation Engineering, 9, 2, 2022, 151-166, DOI: 10.1016/j.jtte.2022.01.003 DOI: https://doi.org/10.1016/j.jtte.2022.01.003
Google Scholar

Malinowski S., Wróbel M., Bandura L., Woszuk A., Franus W.: Use of New Green Bitumen Modifier for Asphalt Mixtures Recycling. Materials, 15, 17, 2022, ID article: 6070, DOI: 10.3390/ma15176070 DOI: https://doi.org/10.3390/ma15176070
Google Scholar

Al-Omari A.A., Khedaywi T.S., Khasawneh M.A.: Laboratory characterization of asphalt binders modified with waste vegetable oil using SuperPave specifications. International Journal of Pavement Research and Technology, 11, 1, 2018, 68–76, DOI: 10.1016/j.ijprt.2017.09.004 DOI: https://doi.org/10.1016/j.ijprt.2017.09.004
Google Scholar

Lei Z., Bahia H., Yi-Qiu T.: Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders. Construction and Building Materials, 86, 2015, 95–100, DOI: 10.1016/j.conbuildmat.2015.03.106 DOI: https://doi.org/10.1016/j.conbuildmat.2015.03.106
Google Scholar

Mainieri J.J.G., Singhvi P., Ozer H., Sharma B.K., Al-Qadi I.L.: Linear and nonlinear viscoelastic parameters of asphalt binders modified with softening agents. Road Materials and Pavement Design, 24, 9, 2023, 2225-2244, DOI: 10.1080/14680629.2022.2131603 DOI: https://doi.org/10.1080/14680629.2022.2131603
Google Scholar

Rasman M., Hassan N.A., Hainin, M.R., Jaya R.P., Haryati Y., Shukry N.A.M., Abdullah M.E., Kamaruddin N.H.M.: Engineering properties of bitumen modified with bio-oil. MATEC Web of Conferences, 250, 2018, ID article: 02003, DOI: 10.1051/matecconf/201825002003 DOI: https://doi.org/10.1051/matecconf/201825002003
Google Scholar

Tian R., Luo H., Huang X., Zheng Y., Zhu L., Liu F.: Correlation Analysis between Mechanical Properties and Fractions Composition of Oil-Rejuvenated Asphalt. Materials, 15, 5, 2022, ID article: 1889, DOI: 10.3390/ma15051889 DOI: https://doi.org/10.3390/ma15051889
Google Scholar

Ochoa-Ambriz L., Pérez-Rea M.D.L.L., Hernández-Padrón G., Limón-Covarrubias P., Galaviz-González J.R., Avalos-Cueva D.: Rheological Evaluation of Softened Binders Blended with Aged Asphalt Selected with a High-Temperature Mixing Chart. Materials, 15, 5, 2022, ID article: 1775, DOI: 10.3390/ma15051775 DOI: https://doi.org/10.3390/ma15051775
Google Scholar

Jenkins K.J., de Groot J.L.A., Van de Ven M.F.C., Molenaar A.: Half-warm foamed bitumen treatment, a new process. Proceedings of the 7th Conference on Asphalt Pavements for Southern Africa, Victoria Falls, 1999, 27-32
Google Scholar

Mallick R.B., Hendrix G.: Use of foamed asphalt in recycling incinerator ash for construction of stabilized base course. Resources, Conservation and Recycling, 42, 3, 2004, 239–248, DOI: 10.1016/j.resconrec.2004.04.007 DOI: https://doi.org/10.1016/j.resconrec.2004.04.007
Google Scholar

Iwański M., Mazurek G., Buczyński P., Iwański M.M.: Effects of hydraulic binder composition on the rheological characteristics of recycled mixtures with foamed bitumen for full depth reclamation, Construction and Building Materials, 330, 2022, ID article 127274, DOI: 10.1016/j.conbuildmat.2022.127274 DOI: https://doi.org/10.1016/j.conbuildmat.2022.127274
Google Scholar

Wirtgen Cold Recycling Technology, Wirtgen GmbH, Windhagen, 2012
Google Scholar

Saleh M.: Characterization of foam bitumen quality and the mechanical properties of foam stabilized mixes. 10th International Conference on Asphalt Pavements (ICAP 2006), Quebec City, 2006
Google Scholar

Iwański M., Mazurek G., Chomicz-Kowalska A., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen. Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 81-110, DOI: 10.7409/rabdim.023.005 DOI: https://doi.org/10.7409/rabdim.023.005
Google Scholar

Mazurek G., Buczyński P., Iwański M., Horodecka R.: Influence of a three-component hydraulic binder on the properties of recycled base course with foamed bitumen and bituminous emulsion: a field investigation. Roads and Bridges – Drogi i Mosty, 21, 4, 2022, DOI: 10.7409/rabdim.022.018 DOI: https://doi.org/10.7409/rabdim.022.018
Google Scholar

Vaitkus A., Čygas D., Laurinavičius A., Perveneckas Z.: Analysis and Evaluation of Possibilities for The Use of Warm Mix Asphalt in Lithuania. The Baltic Journal
Google Scholar

of Road and Bridge Engineering, 4, 2, 2009, 280-86, DOI: 10.3846/1822-427X.2009.4.80-86 DOI: https://doi.org/10.3846/1822-427X.2009.4.80-86
Google Scholar

Van De Ven M.F.C., Jenkins K.J., Voskuilen J.L.M., Van De Beemt R.: Development of (half-) warm foamed bitumen mixes. International Journal of Pavement Engineering, 8, 2, 2007, 163-175, DOI: 10.1080/10298430601149635 DOI: https://doi.org/10.1080/10298430601149635
Google Scholar

Jenkins K.J.: Mix Design Considerations for Cold and Half-Warm Bituminous Mixes with Emphasis on Foamed Bitumen. Ph.D Thesis, Department of Civil Engineering, Faculty of Engineering, University of Stellenbosch, Stellebosch, South Africa, 2000
Google Scholar

Piłat J., Król J., Błażejowski K., Kowalski K., Sarnowski M.: Badania sztywności pełzania asfaltów w reometrze zginanej belki (BBR). Drogownictwo, 65, 3, 2010, 75-80
Google Scholar

Cheraghian G., Cannone Falchetto A., You Z., Chen S., Kim Y.S., Westerhoff J., Moon K.H., Wistuba M.P.: Warm mix asphalt technology: An up to date review, Journal of Cleaner Production, 268, 2020, 122128, DOI: 10.1016/j.jclepro.2020.122128 DOI: https://doi.org/10.1016/j.jclepro.2020.122128
Google Scholar

Nithinchay J., Dhandapani B.P., Mullapudi R.S.: Application of warm mix technology – design and performance characteristics: Review and way forward. Construction and Building Materials, 414, 2024,134915, DOI: 10.1016/j.conbuildmat.2024.134915 DOI: https://doi.org/10.1016/j.conbuildmat.2024.134915
Google Scholar

Mrugała J., Iwański M.: Resistance to permanent deformation of asphalt concrete with F-T wax modified foamed bitumen. Procedia Engineering, 108, 2015, 459-466, DOI: 10.1016/j.proeng.2015.06.171 DOI: https://doi.org/10.1016/j.proeng.2015.06.171
Google Scholar

Mohd Hasan M.R., Guo T., Wang H., Mohamed Jaafar Z.F., You Z.: Experimental assessments of methanol-based foaming agent in latex modified foamed binders and warm asphalt mixtures, Journal of Road Engineering, 2, 1, 2022, 84–97, DOI: 10.1016/j.jreng.2022.03.002 DOI: https://doi.org/10.1016/j.jreng.2022.03.002
Google Scholar

Iwański M., Chomicz-Kowalska A., Maciejewski K., Iwański M.M., Radziszewski P., Liphardt A., Król J.B., Sarnowski M., Kowalski K.J., Pokorski P.: Warm mix asphalt binder utilizing water-foaming and fluxing using bio-derived agent. Materials, 15, 24, 2022, ID article: 8873, DOI: 10.3390/ma15248873 DOI: https://doi.org/10.3390/ma15248873
Google Scholar

Iwański M.M., Chomicz-Kowalska A., Maciejewski K.: Effect of Surface Active Agent (SAA) on 50/70 Bitumen Foaming Characteristics. Materials, 12, 21, 2019, ID article: 3514, DOI: 10.3390/ma12213514 DOI: https://doi.org/10.3390/ma12213514
Google Scholar

SASOBIT LC Lower-carbon asphalt additive. Sasol Chemicals Performance Solutions, Hamburg, Germany, https://sasobit.com/en/sasobit-lc, available: 15.09.2024
Google Scholar

Środek adhezyjny do asfaltów drogowych WETFIX BE. https://www.izbudujemy.pl/produkty/18048/Srodek-adhezyjny-do-asfaltow-drogowych-WETFIX-BE, available: 15.09.2024
Google Scholar

Montgomery D.C.: Design and analysis of experiments (Eighth edition). John Wiley & Sons, 2013
Google Scholar

Lazić Ž.R: Design of experiments in chemical engineering: a practical guide. Wiley-VCH, Weinheim, 2004 DOI: https://doi.org/10.1002/3527604162
Google Scholar

Iwański M., Mazurek G.: Structuring role of F-T synthetic wax in bitumen. Bulletin of the Polish Academy of Sciences: Technical Science. 62, 3, 2014, 525-534, DOI: 10.2478/bpasts-2014-0057 DOI: https://doi.org/10.2478/bpasts-2014-0057
Google Scholar

Mateusz Iwański

matiwanski@tu.kielce.pl
https://orcid.org/0000-0002-3183-0141

Affiliation:

Kielce University of Technology, Faculty of Civil Engineering and Architecture, 7 Tysiąclecia Państwa Polskiego Av., 25-314 Kielce Poland

Małgorzata Durlej

https://orcid.org/0000-0002-6755-1283

Affiliation:

Kielce University of Technology, Faculty of Civil Engineering and Architecture, 7 Tysiąclecia Państwa Polskiego Av., 25-314 Kielce Poland

Karolina Janus

https://orcid.org/0000-0002-1755-3942

Affiliation:

Kielce University of Technology, Faculty of Civil Engineering and Architecture, 7 Tysiąclecia Państwa Polskiego Av., 25-314 Kielce Poland

Renata Horodecka

https://orcid.org/0000-0002-5933-5177

Affiliation:

Road and Bridge Research Institute, 1 Instytutowa St., 03-302 Warsaw Poland

The effect of synthetic wax and surface-active agent on the aging and low-temperature properties of 50/70 bitumen before and after foaming

Abstract

Keywords:

Similar Articles

Most read articles by the same author(s)

Downloads

Mateusz Iwański

Małgorzata Durlej

Karolina Janus

Renata Horodecka