Bezkontaktowa metoda pomiaru deformacji w badaniach wybranych materiałów stosowanych w budownictwie drogowym

Jarosław Górszczyk; Konrad Malicki

doi:10.7409/RABDIM.023.024

Published: 2023-12-30

Vol. 22 No. 4 (2023)

Non-contact method for measuring deformation in testing selected materials used in road construction

Jarosław Górszczyk

, Konrad Malicki

Section: Articles

https://doi.org/10.7409/RABDIM.023.024

Abstract

High requirements for materials used in road construction make it necessary to use modern methods for assessing the mechanical parameters of these materials. One such method is the Digital Image Correlation (DIC) method. The paper presents the possibilities of using the non-contact DIC method to measure deformation in testing selected mechanical properties of asphalt mixture samples and a composite made of a polymer matrix reinforced with a glass fiber grid (fiber reinforced polymer – FRP). The paper shows deformation analysis of all the observed surfaces of the tested samples. It was found that in terms of static tensile strength, the performance of the FRP tape is similar to the behavior of geogrids used to strengthen road pavement structures. The discussed results of own research and research described in the literature confirmed the usefulness of the DIC method in testing materials used in civil engineering.

Keywords:

asphalt mixtures, mechanical properties testing, digital image correlation method (DIC), fiber reinforced polymer (FRP)

Most read articles by the same author(s)

Jarosław Górszczyk, Wanda Grzybowska, The use of FEM for thermal analyses of the asphalt pavement , Roads and Bridges - Drogi i Mosty: Vol. 10 No. 4 (2011)

Download files

PDF

Citation rules

Górszczyk, J., & Malicki, K. (2023). Non-contact method for measuring deformation in testing selected materials used in road construction. Roads and Bridges - Drogi I Mosty, 22(4), 423–432. https://doi.org/10.7409/RABDIM.023.024

Cited by / Share

Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Analizy i projektowanie konstrukcji nawierzchni podatnych i półsztywnych. Red. J. Judycki. WKŁ, Warszawa 2014
Google Scholar

Górszczyk J., Malicki K.: Experimental Investigation of Loading Frequency Influence on a Strength of Asphalt Interlayer Bonding. Archives of Civil Engineering, 66, 1, 2020, 197–208, DOI: 10.24425/ace.2020.131783 DOI: https://doi.org/10.1155/2020/8841139
Google Scholar

Iwański M., Mazurek G., Chomicz-Kowalska A., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen. Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 81–114, DOI: 10.7409/rabdim.023.005
Google Scholar

Skotnicki Ł., Kuźniewski J.: Cracking resistance of recycled mineral-cement-emulsion mixtures. Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 19–39, DOI: 10.7409/rabdim.023.002 DOI: https://doi.org/10.7409/rabdim.023.002
Google Scholar

Słowik M., Bartkowiak M.: Review of analytical-empirical methods for determining stiffness moduli of asphalt mixtures. Roads and Bridges – Drogi i Mosty, 17, 1, 2018, 5–22, DOI: 10.7409/rabdim.018.001
Google Scholar

Jahanbakhsh H., Karimi M.M., Tabatabaee N.: Experimental and numerical investigation of low-temperature performance of modified asphalt binders and mixtures. Road Materials and Pavement Design, 18, 6, 2017, 1353–1374, DOI: 10.1080/14680629.2016.1220864 DOI: https://doi.org/10.1080/14680629.2016.1220864
Google Scholar

Grzesik B., Bzówka J., Sorociak W., Mieczkowski P.:Asphalt Concrete Produced from Rejuvenated Reclaimed Asphalt Pavement (RAP). Archives of Civil Engineering, 66, 2, 2020, 321–337, DOI: 10.24425/ace.2020.131812 DOI: https://doi.org/10.24425/ace.2020.131812
Google Scholar

Chen Y., Wang Y., Guo S., Zhao J., Feng D., Yi J.: Research on aging performance of hot mix fully recycled epoxy asphalt mixture with 100% RAP utilization-Take the surface course as the application target. Construction and Building Materials, 392, 131430, 2023, DOI: 10.1016/j.conbuildmat.2023.131430 DOI: https://doi.org/10.1016/j.conbuildmat.2023.131430
Google Scholar

Pouget S. et al.: Advanced characterisation of multi-recycled warm asphalt pavement (MRWAP) with high content of recycled asphalt pavement. Road Materials and Pavement Design, 24, 2, 2023, 388–409, DOI: 10.1080/14680629.2021.2018352 DOI: https://doi.org/10.1080/14680629.2021.2018352
Google Scholar

Dołżycki B., Jaczewski M., Szydłowski C., Bańkowski W., Gajewski M.D.: Analysis of selected mechanical properties of mineral-cement-emulsion mixtures (MCE). Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 41–61, DOI: 10.7409/rabdim.023.003 DOI: https://doi.org/10.7409/rabdim.023.003
Google Scholar

Sutton M.A., Orteu J.J., Schreier H.: Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications. Springer, New York, NY, 2009
Google Scholar

Tan C.-S., Karuppanan S., Khoo S.-W.: A Review of Surface Deformation and Strain Measurement Using Two-Dimensional Digital Image Correlation. Metrology and Measurement Systems, 23, 3, 2016, 461–480, DOI: 10.1515/mms-2016-0028 DOI: https://doi.org/10.1515/mms-2016-0028
Google Scholar

Trinh-Duc D., Piotrowski A., Ajdukiewicz C., Woyciechowski P., Gajewski M.D.: Estimation of Post-Cracking Dissipation Capabilities of Fiber Reinforced Concretes in Three Point Bending Test Monitored with Application of Digital Image Correlation System. Materials, 14, 17, 2021, DOI: 10.3390/ma14175088 DOI: https://doi.org/10.3390/ma14175088
Google Scholar

Hill B., Buttlar W.G.: Evaluation of polymer modification in asphalt mixtures through digital image correlation and performance space diagrams. Construction and Building Materials, 122, 2016, 667–673, DOI: 10.1016/j.conbuildmat.2016.06.108 DOI: https://doi.org/10.1016/j.conbuildmat.2016.06.108
Google Scholar

Roberto A., Romeo E., Tebaldi G., Montepara A.: Introducing a new test protocol to evaluate the rate of damage accumulation in mastics at intermediate temperatures. Road Materials and Pavement Design, 22, sup1, 2021, S397–S410, DOI: 10.1080/14680629.2021.1906306 DOI: https://doi.org/10.1080/14680629.2021.1906306
Google Scholar

Radhi Radeef H. et al.: Fracture resistance of polymeric wastes modified asphalt using R-curve and digital image correlation. Theoretical and Applied Fracture Mechanics, 123, 103691, 2023, DOI: 10.1016/j.tafmec.2022.103691 DOI: https://doi.org/10.1016/j.tafmec.2022.103691
Google Scholar

Jiang-san H., Lan W., Xin L.: Anti-fatigue performance of warm-mixed rubber powder modified asphalt mixture based on the DIC technique. Construction and Building Materials, 335, 127489, 2022, DOI: 10.1016/j.conbuildmat.2022.127489 DOI: https://doi.org/10.1016/j.conbuildmat.2022.127489
Google Scholar

Shi L., Wang Y., Li H., Liang H., Lin B., Wang D.: Recycled asphalt mixture’s discrete element model-based composite structure and mesoscale-mechanical properties. Case Studies in Construction Materials, 18, e01987, 2023, DOI: 10.1016/j.cscm.2023.e01987 DOI: https://doi.org/10.1016/j.cscm.2023.e01987
Google Scholar

Teguedi M.C., Blaysat B., Toussaint E., Moreira S., Liandrat S., Grédiac M.: Applying a full-field measurement technique for studying the local deformation in reclaimed asphalt pavements. Construction and Building Materials, 121, 2016, 547–558, DOI: 10.1016/j.conbuildmat.2016.06.013 DOI: https://doi.org/10.1016/j.conbuildmat.2016.06.013
Google Scholar

Willis J. Williams B.: Asphalt Pavement Industry Survey on Recycled Materials and Warm-Mix Asphalt Usage 2021. Information Series 138. 12th Annual Asphalt Pavement Industry Survey, 2022, DOI: 10.13140/RG.2.2.23149.26081
Google Scholar

Almusallam T.H., Al-Salloum Y.A.: Ultimate strength prediction for RC beams externally strengthened by composite materials. Composites Part B: Engineering, 32, 7, 2001, 609–619, DOI: 10.1016/S1359-8368(01)00008-7 DOI: https://doi.org/10.1016/S1359-8368(01)00008-7
Google Scholar

S&P G-Sheet E 50/50 – S&P G-Sheet AR 50/50. S&P Polska, Malbork, accessed: Dec. 12, 2023, https://www.sp-reinforcement.pl/pl-PL/produkty/sp-g-sheet-e-5050-sp-g-sheet-ar-5050
Google Scholar

Herbst C., Splitthof K., Ettemeyer A.: New Features in Digital Image Correlation Techniques. Warrendale, PA, USA, SAE World Congress & Exhibition, 2005, DOI: 10.4271/2005-01-0897 DOI: https://doi.org/10.4271/2005-01-0897
Google Scholar

Górszczyk J., Malicki K.: New approach to junction efficiency analysis of hexagonal geogrid using digital image correlation method. Geotextiles and Geomembranes, 51, 5, 2023, 70–80, DOI: 10.1016/j.geotexmem.2023.04.009 DOI: https://doi.org/10.1016/j.geotexmem.2023.04.009
Google Scholar

Lu P., Liu Q., Guo J.: Camera Calibration Implementation Based on Zhang Zhengyou Plane Method. in: Proceedings of the 2015 Chinese Intelligent Systems Conference, in Lecture Notes in Electrical Engineering. Springer, Berlin, Heidelberg 2016, 29–40, DOI: 10.1007/978-3-662-48386-2_4 DOI: https://doi.org/10.1007/978-3-662-48386-2_4
Google Scholar

Digital Image Correlation (DIC). 3D Full-Field Measurement. Dantec Dynamics, Precision Measurement Systems & Sensors. Accessed: Nov. 21, 2023. Available: https://www.dantecdynamics.com/solutions/digital-image-correlation-dic/
Google Scholar

PN-EN 12697-23. Bituminous mixtures – Test methods for hot mix asphalt – Part 23: Determination of the indirect tensile strength of bituminous specimens. 2003
Google Scholar

EN ISO 10319. Geosynthetics, Wide-Width Tensile Test. 2015
Google Scholar

Nawierzchnie asfaltowe na drogach krajowych. Wymagania Techniczne WT-2 cz. I. Mieszanki mineralno-asfaltowe. GDDKiA, Warszawa, 2014
Google Scholar

Nawierzchnie asfaltowe na drogach krajowych. Wymagania Techniczne WT-2 cz. II. Wykonanie warstw nawierzchni asfaltowych. GDDKiA, Warszawa, 2016
Google Scholar

Korzeniowski M.: Badanie właściwości mechanicznych mieszanek mineralno-asfaltowych z zastosowaniem systemu do cyfrowej korelacji obrazu. Praca dyplomowa. Politechnika Krakowska, Kraków, 2014
Google Scholar

Fibrosan – The leading GRP (FRP) Panel Manufacturer of Eastern Europe. Accessed: Dec. 12, 2023, https://fibrosan.com.tr/index-e.html
Google Scholar

Górszczyk J., Malicki K., Zych T.: Application of Digital Image Correlation (DIC) Method for Road Material Testing. Materials, 12, 15, 2019, DOI: 10.3390/ma12152349 DOI: https://doi.org/10.3390/ma12152349
Google Scholar

Jarosław Górszczyk

jgorszcz@pk.edu.pl
https://orcid.org/0000-0001-5214-6587

Affiliation:

Cracow University of Technology, Faculty of Civil Engineering Chair of Highway and Traffic Enigneering, 24 St. Warszawska, 31-155 Cracow Poland

Konrad Malicki

https://orcid.org/0000-0002-3493-953X

Affiliation:

Cracow University of Technology, Faculty of Civil Engineering Chair of Highway and Traffic Enigneering, 24 St. Warszawska, 31-155 Cracow Poland

Non-contact method for measuring deformation in testing selected materials used in road construction

Abstract

Keywords:

Similar Articles

Most read articles by the same author(s)

Downloads

Jarosław Górszczyk

Konrad Malicki