Finite element and fatigue analysis of flexible pavements based on temperature profile modeling

Seoyoung Cho; Éva Lakatos

doi:10.7409/rabdim.022.006

Published: 2022-06-29

Vol. 21 No. 2 (2022)

Finite element and fatigue analysis of flexible pavements based on temperature profile modeling

Seoyoung Cho , Éva Lakatos

Section: Articles

https://doi.org/10.7409/rabdim.022.006

Abstract

The effect of temperature on asphalt pavement structure is of great importance due to the nature of binder used in the asphalt layers. An equivalent temperature is commonly applied to eliminate the effect of temperature dependence in calculations of mechanical properties of the asphalt and of the pavement. Equivalent temperatures, applied as constant values, are supposed to have the same effect on fatigue behavior of the pavement in the period of one year as the real varying weather conditions. The aim of the presented research was to compare the behavior of the pavement under realistic temperature data throughout a single year with the results of the traditional pavement design method. Temperature data were obtained from a previously established weather station. Binder viscosity and asphalt dynamic modulus were defined based on the temperature profile for asphalt layers divided into 19 sublayers. This subdivision was introduced to better reflect the changes in strength characteristics of the asphalt layers along the depth of the structure. Comparison with the simple calculation using the equivalent temperature method showed that the detailed model outlined in this paper can provide better prediction of the overall pavement structural capacity. The focus of this study is to apply asphalt layer discretization to reflect temperature variation and its influence on changes in strength properties of asphalt mixtures. Temperature at each sublayer was estimated using the German specification, dynamic modulus was determined using the Witczak model, and the structural analysis was performed employing the finite element method.

Keywords:

finite element method, flexible pavement modeling, temperature modeling, temperature profile.

Similar Articles

Andrzej Dubiniewicz, State of preservation of carbonate aggregates in alkaline environment , Roads and Bridges - Drogi i Mosty: Vol. 20 No. 4 (2021)
Dariusz Sybilski, Robert Mularzuk, Wojciech Bańkowski, Dominika Maliszewska, Maciej Maliszewski, High modulus asphalt concrete with local mineral aggregates , Roads and Bridges - Drogi i Mosty: Vol. 6 No. 4 (2007)
Małgorzata J. Glinicka, Geotechnical properties of cohesive soils from Bialystok area improved by cement and lime , Roads and Bridges - Drogi i Mosty: Vol. 5 No. 4 (2006)
Bartłomiej Krawczyk, Piotr Mackiewicz, Dariusz Dobrucki, Use of plastic waste in cement-bound layers , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 3 (2023)
Katarzyna Konieczna, Jan Król, Investigation of tertiary Flow Behavior of bitumen stabilised materials with bitumen emulsion , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)

<< < 19 20 21 22 23 24

You may also start an advanced similarity search for this article.

Download files

PDF

Citation rules

Cho, S., & Lakatos, Éva. (2022). Finite element and fatigue analysis of flexible pavements based on temperature profile modeling. Roads and Bridges - Drogi I Mosty, 21(2), 103–116. https://doi.org/10.7409/rabdim.022.006

Cited by / Share

References

Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures. National Cooperative Highway Research Program (NCHRP), 1-47A Report, Transportation Research Board, National Research Council, Washington, 2004
Google Scholar

Guidelines for mathematical dimensioning of foundations of traffic surfaces with a course asphalt surface RDO. Research Society for Roads and Traffic, Berlin, 2009
Google Scholar

Barber S.E.: Calculation of Maximum Pavement Temperatures from Weather Reports. Highway Research Board Bulletin, 168, 1957, 1-8
Google Scholar

Rumney T.N., Jimenez R.A.: Pavement Temperatures in the Southwest. 50th Annual Meeting of the Highway Research Board, Washington, 1971
Google Scholar

Southgate H.F., Deen R.C.: Temperature Distribution Within Asphalt Pavements and Its Relationship to Pavement Deflection. Highway Research Record, 291, 1969, 116-131
Google Scholar

Thompson R.M., Dempsey J.B., Hill H., Vogel J.: Characterizing temperature effects for pavement analysis and design. 66th Annual Meeting of the Transportation Board, Washington, 1987, http://onlinepubs.trb.org/Onlinepubs/trr/1987/1121/1121-003.pdf (21.12.2021)
Google Scholar

Duncan J.M., Monismith L.C., Wilson L.E.: Finite Element Analyses of Pavements. Highway Research Record, 228, 1968, 18-33
Google Scholar

Burmister D.M.: The general Theory of Stresses and Displacements in Layered Systems I. Journal of Applied Physics, 16, 2, 1945, 89-94, DOI: 10.1063/1.1707558
Google Scholar

Tóth C., Primusz P.: New Hungarian mechanistic-empirical design procedure for asphalt pavements. Baltic Journal of Road and Bridge Engineering, 15, 1, 2020, 161-186, DOI: 10.7250/bjrbe.2020-15.466
Google Scholar

Tóth C., Pethő L.: Calculating the equivalent temperature for mechanistic pavement design according to the French method for Hungarian climatic conditions. Acta Technica Jaurinensis, 14, 3, 2021, DOI: 10.14513/actatechjaur.00602
Google Scholar

Pszczoła M., Judycki J.: Equivalent temperature for design of airport pavements using mechanistic-empirical methods. 2nd Annual International Conference “Airport pavements”, Strbske Pleso, Slovak Republic, 2014, https://www.researchgate.net/publication/262186813_Equivalent_temperature_for_design_of_airport_pavements_using_mechanistic-empirical_methods (21.12.2021)
Google Scholar

AASHTO: Mechanistic-empirical pavement design guide. American Association of State Highway and Transportation Officials, Washington, 2008
Google Scholar

Monismith L.C., Hicks G.R., Finn N.F., Sousa J., Harvey J., Weissman S., Deacon J., Coplantz J., Paulsen G.: Permanent deformation response of asphalt aggregate mixes. National Research Council, Washington, 1994
Google Scholar

Nagórski R., Tutka P., Złotowska M.: Defining the domain and boundary conditions for finite element model of flexible road pavement. Roads and Bridges - Drogi i Mosty, 16, 4, 2017, 265-277, DOI: 10.7409/rabdim.017.017
Google Scholar

LTPP Computed Parameter: Dynamic modulus. Federal Highway Administration, McLean, 2011
Google Scholar

Mechanistic-empirical pavement design specification. Ministry of Land, Infrastructure and Transport (MOLIT), Seoul, 2015
Google Scholar

Guide to Pavement Technology, Part 2: Pavement Structural Design. Austroads Ltd., Sydney, 2017
Google Scholar

Seoyoung Cho

cho.seoyoung@emk.bme.hu

Affiliation:

Budapest University of Technology and Economics, Department of Highway and Railway, Műegyetem rkp. 3, K épület magasföldszint 98, 1111 Budapest, Hungary

Éva Lakatos

Affiliation:

Budapest University of Technology and Economics, Department of Structural Mechanics, Műegyetem rkp. 3, K épület magasföldszint 98, 1111 Budapest, Hungary

Finite element and fatigue analysis of flexible pavements based on temperature profile modeling

Abstract

Keywords:

Similar Articles

Downloads

Seoyoung Cho

Éva Lakatos