Prognozowanie właściwości mieszanki mineralno-spoiwowej wytwarzanej w technologii na „zimno" z asfaltem spienionym w aspekcie właściwości zapraw ze spoiw hydraulicznych

Przemysław Buczyński; Grzegorz Mazurek; Marek Iwański

doi:10.7409/rabdim.023.019

Published: 2023-12-30

Vol. 22 No. 4 (2023)

Predicting the properties of a mixture produced using “cold” technology with foamed bitumen in terms of the properties of hydraulic binder mortars

Przemysław Buczyński , Grzegorz Mazurek , Marek Iwański

Section: Articles

https://doi.org/10.7409/rabdim.023.019

Abstract

The paper presents the correlation between the mechanical properties of the mineral-aggregate mixture with foamed bitumen (MCAS) and the mechanical properties of mortars containing hydraulic binder. A significant aspect of the presented research results was an attempt to determine whether it is possible to predict the properties of the recycled cold mix with foamed bitumen (MCAS) based on preliminary results obtained for mortars. The prediction of MCAS properties through mortar properties was limited to basic mechanical properties of mortars, namely compressive strength (RC) and flexural tensile strength (Rf). To achieve this goal, seven hydraulic binders were designed with a controlled composition using a simplex-centroid experimental plan known as the mixture design plan. The components of the hydraulic binders used in its composition were Portland cement CEM I 32.5R, hydrated lime Ca(OH)2, and by-products of cement production in powder form (UCPP). The designed and prepared hydraulic binders were then used in the composition of the mineralaggregate mixture with foamed bitumen at a quantity of 3.0% (m/m). Subsequently, in laboratory conditions, the mineralaggregate mixture with foamed bitumen was prepared, and mechanical property tests were conducted, including indirect tensile strength (ITSDRY), axial compressive strength (UCS), modulus of stiffness (Sm), fracture toughness (KIC), and the dynamic modulus |E*| determined as a function of frequency and temperature. The analysis results suggest that there is potentially the ability to predict selected mechanical properties of the MCAS mixture by analyzing the mechanical results for mortars. However, this application is limited. The research results obtained for non-destructive properties, such as the dynamic modulus |E*|, are satisfactorily described by the compressive strength results of mortars after 28 days of curing. Other analyzed characteristics did not show a significant correlation.

Keywords:

cold-recycled asphalt mixture, foamed bitumen, hydraulic binder, deep cold recycling, correlation.

Most read articles by the same author(s)

Marek Iwański, Grzegorz Mazurek, Anna Chomicz-Kowalska, Przemysław Buczyński, Małgorzata Cholewińska, Mateusz Marek Iwański, Krzysztof Maciejewski, Piotr Ramiączek, Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 1 (2023)
Marek Iwański, Grzegorz Mazurek, Hydrated lime effect on rutting resistance of SMA pavements , Roads and Bridges - Drogi i Mosty: Vol. 12 No. 4 (2013)
Marek Iwański, Grzegorz Mazurek, Synthetic wax effect on the resilient stiffness modulus of asphalt concrete , Roads and Bridges - Drogi i Mosty: Vol. 11 No. 3 (2012)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Renata Horodecka, Influence of a three-component hydraulic binder on the properties of recycled base course with foamed bitumen and bituminous emulsion: a field investigation , Roads and Bridges - Drogi i Mosty: Vol. 21 No. 4 (2022)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Artur Kowalczyk, Marcin Podsiadło, Prediction of irreversible susceptibility and elastic recurrence of asphalts modified with waste plastomers in MSCR study , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)

Download files

PDF (Język Polski)

Citation rules

Buczyński, P., Mazurek, G., & Iwański, M. (2023). Predicting the properties of a mixture produced using “cold” technology with foamed bitumen in terms of the properties of hydraulic binder mortars. Roads and Bridges - Drogi I Mosty, 22(4), 363–378. https://doi.org/10.7409/rabdim.023.019

Cited by / Share

References

Czapik P., Zapała-Sławeta J., Owsiak Z., Stępień P.: Hydration of cement by-pass dust. Construction and Building Materials, 231, 117139, 2020, DOI: 10.1016/j.conbuildmat.2019.117139
Google Scholar

Szyller A., Król J., Bańkowski W.: Współczesne doświadczenia ze stosowania recyklingu na gorąco w wytwórni mieszanek mineralno-asfaltowych w Polsce. Nawierzchnie asfaltowe, 1, 2017
Google Scholar

Dołżycki B.: Polish experience with cold in-place recycling. IOP Conference Series: Materials Science and Engineering, 236, 012089, 2017, DOI: 10.1088/1757-899X/236/1/012089
Google Scholar

Skotnicki Ł., Kuźniewski J., Szydło A.: Stiffness Identification of Foamed Asphalt Mixtures with Cement, Evaluated in Laboratory and In Situ in Road Pavements. Materials, 13, 5, 1128, 2020, DOI: 10.3390/ma13051128
Google Scholar

Iwański M., Mazurek G., Buczyński P.: Bitumen Foaming Optimisation Process on the Basis of Rheological Properties. Materials, 11, 10, 1854, 2018, DOI: 10.3390/ma11101854
Google Scholar

Niazi Y., Jalili M.: Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23, 3, 2009,1338–1343, DOI: 10.1016/j.conbuildmat.2008.07.020
Google Scholar

Kukiełka J,. Bańkowski W.: The experimental study of mineral-cement-emulsion mixtures with rubber powder addition. Construction and Building Materials, 226, 2019, 759–766, DOI: 10.1016/j.conbuildmat.2019.07.276
Google Scholar

Dołżycki B.: Spękania nawierzchni z podbudową mieszanki mineralno-cementowo-emulsyjnej na przykładzie drogi krajowej nr 7. Drogownictwo, 12, 2009, 411–417
Google Scholar

Baghini M.S., Ismail A., Bin Karim M.R.: Evaluation of cement-treated mixtures with slow setting bitumen emulsion as base course material for road pavements. Construction and Building Materials, 94, 2015, 323–336, DOI: 10.1016/j.conbuildmat.2015.07.057
Google Scholar

Kavussi A., Modarres A.: Laboratory fatigue models for recycled mixes with bitumen emulsion and cement. Construction and Building Materials, 24, 10, 2010, 1920–1927, DOI: 10.1016/j.conbuildmat.2010.04.009
Google Scholar

Raport z Projektu Badawczego – Nowoczesne Technologie Materiałowe TECHMATSTRATEG I „Innowacyjna technologia wykorzystująca optymalizację środka wiążącego przeznaczonego do recyklingu głębokiego na zimno konstrukcji nawierzchni zapewniająca jej trwałość eksploatacyjną”. (TECHMATSTRATEG1/349326/9/NCBR/2017). NCBiR, 2017–2021
Google Scholar

Iwański M., Mazurek G., Buczyński P., Iwański M.M.: Effects of hydraulic binder composition on the rheological characteristics of recycled mixtures with foamed bitumen for full depth reclamation. Construction and Building Materials, 330, 127274, 2022, DOI: 10.1016/j.conbuildmat.2022.127274
Google Scholar

Montgomery D.C.: Design and analysis of experiments. 10th Edition. John Wiley & Sons Inc., Hoboken, 2013
Google Scholar

Deming S.N., Morgan S.L.: Experimental design: a chemometric approach. Second, revised and expanded edition. Amsterdam, Elsevier, 1993
Google Scholar

Dołżycki B.: Instrukcja projektowania i wbudowania mieszanek mineralno-cementowo-emulsyjnych (MCE). Warszawa, GDDKiA, 2014
Google Scholar

Dołżycki B., Jaczewski M., Szydłowski C., Bańkowski W., Gajewski M.: Analysis of selected mechanical properties of mineral-cement-emulsion mixtures (MCE). Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 41–61, DOI: 10.7409/rabdim.023.003
Google Scholar

Iwański M., Buczyński P.: Properties of the Recycled Base Course with Respect to the Road Binder Type. The 9th International Conference „Environmental Engineering” 22–23 May 2014, Vilnius, Lithuania, DOI: 10.3846/enviro.2014.156
Google Scholar

Owsiak Z., Czapik P., Zapała-Sławeta J.: Properties of a Three-Component Mineral Road Binder for Deep-Cold Recycling Technology. Materials, 13, 16, 2020, DOI: 10.3390/ma13163585
Google Scholar

Iwański M., Mazurek G., Chomicz-Kowalska A., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Influence of mixed hydraulic binder on the properties of recycled asphalt mixtures with foamed bitumen. Roads and Bridges – Drogi i Mosty, 22, 1, 2023, 81–114, DOI: 10.7409/rabdim.023.005
Google Scholar

Cold – Recycling Technology. Wirtgen Group, 2012
Google Scholar

Csanyi L.H.: Foamed asphalt. American Road Builders Association (ARBA), Technical Bulletin, 240, 1959, 3–14
Google Scholar

Guatimosim F.V.K., Vasconcelos L., Bernucci L.L.B., Jenkins K.J.: Laboratory and field evaluation of cold recycling mixture with foamed asphalt. Road Materials and Pavement Design, 19, 2, 2018, 385–399, DOI: 10.1080/14680629.2016.1261726
Google Scholar

Iwański M., Chomicz-Kowalska A., Mazurek G., Buczyński P., Cholewińska M., Iwański M.M., Maciejewski K., Ramiączek P.: Effects of the Water-Based Foaming Process on the Basic and Rheological Properties of Bitumen 70/100. Materials, 14, 11, 2021, DOI: 10.3390/ma14112803
Google Scholar

PN-EN 13286-2 :2010 Mieszanki niezwiązane i związane hydraulicznie. Część 2: Metody badań laboratoryjnych gęstości na sucho i zawartości wody. Zagęszczanie metodą Proctora
Google Scholar

PN-EN 13282-1:2013-07 Hydrauliczne spoiwa drogowe: Część 1: Hydrauliczne spoiwa drogowe szybkowiążące. Skład wymagania i kryteria zgodności
Google Scholar

PN-EN 13282-2:2015-06 Hydrauliczne spoiwa drogowe: Część 2: Hydrauliczne spoiwa drogowe normalnie wiążące. Skład wymagania i kryteria zgodności
Google Scholar

Owsiak Z., Zapała-Sławeta J., Czapik P.: Raport 1/1/PŚk/2018 – Wyniki badań innowacyjnego środka wiążącego. Politechnika Świętokrzyska, Kielce, 2018
Google Scholar

PN-EN 196-1 Metody badania cementu: Część 1: Oznaczanie wytrzymałości
Google Scholar

Wiłun Z.: Zarys geotechniki: podręcznik akademicki. Warszawa, WKŁ, 2013
Google Scholar

Tayeh B.A., Hamada H.M., Almeshal I., Bakar B.H.A.: Durability and mechanical properties of cement concrete comprising pozzolanic materials with alkali-activated binder: A comprehensive review. Case Studies in Construction Materials, 17, e01429, 2022, DOI: 10.1016/j.cscm.2022.e01429
Google Scholar

Neville A.M., Ajdukiewicz A., Degler A., Kasperkiewicz J.: Właściwości betonu. Kraków, Stowarzyszenie Producentów Cementu, 2012
Google Scholar

Sobczyk M.: Statystyka. Wyd. 5 uzup. Warszawa, Wydawnictwo Naukowe PWN, 2007
Google Scholar

Steczkowski J., Zeliaś A.: Statystyczne metody analizy cech jakościowych. Warszawa, PWE, 1981
Google Scholar

Przemysław Buczyński

p.buczynski@tu.kielce.pl

Affiliation:

Kielce University of Technology, Kielce, 7 Tysiąclecia Państwa Polskiego AV., 25-314 Kielce

Grzegorz Mazurek

Affiliation:

Kielce University of Technology, Kielce, 7 Tysiąclecia Państwa Polskiego AV., 25-314 Kielce

Marek Iwański

Affiliation:

Kielce University of Technology, Kielce, 7 Tysiąclecia Państwa Polskiego AV., 25-314 Kielce

Predicting the properties of a mixture produced using “cold” technology with foamed bitumen in terms of the properties of hydraulic binder mortars

Abstract

Keywords:

Similar Articles

Most read articles by the same author(s)

Downloads

Przemysław Buczyński

Grzegorz Mazurek

Marek Iwański