Recykling na zimno ze spienionym asfaltem, wiedza zdobyta z toru testowego w Niemczech

Mehdi Kalantari

doi:10.7409/RABDIM.023.028

Published: 2023-12-30

Vol. 22 No. 4 (2023)

Cold recycling with foamed bitumen, gained knowledge from a test track in Germany

Mehdi Kalantari

Section: Articles

https://doi.org/10.7409/RABDIM.023.028

Abstract

During the recent years, the demand on more sustainable transportation infrastructure has increased considerably in the EU. In Germany the political goal is to become climate neutral by 2035. Among different solutions, recycling is an important approach to achieve circular economy for pavements as one of the main parts of transportation infrastructure. Cold recycling is a technique which needs less energy and has the potential of using higher rates of recycled material. The resulting material may not have the same characteristics as the conventional hot mix asphalt, but through an optimised mix and structural design, it is possible to construct pavements with the same or even higher durability than the conventional types but a greater potential for sustainability. In 2018 a research project on the topic of cold recycling with foamed bitumen was defined at Federal Highway Research Institute (BASt) in cooperation with the Wirtgen GmbH. The main goal of the project was to gather information and experience on the behaviour of cold recycled material with relatively low amounts of bitumen and cement, known internationally as Bitumen Stabilized Material (BSM). For this purpose, a 100-meter test section was built at the demonstration, investigation, and reference areal of BASt (duraBASt) with two different construction types (reference and cold recycled). Both sections were loaded with the Mobile Load Simulator (MLS30). This paper presents some of the results and findings from the non-destructive (FWD and rutting measurements) monitoring and tests on the extracted cores. The program proved that it is possible to design and construct pavements with the BSM and the comparable performance as conventional pavements in Germany.

Keywords:

cold recycling, foamed bitumen, Bitumen stabilized material (BSM), Accelerated Pavement Testing (APT), duraBASt

Similar Articles

Czesław Machelski, Service load capacity of reinforced concrete rebuilt bridges , Roads and Bridges - Drogi i Mosty: Vol. 1 No. 1 (2002)
Czesław Machelski, Robert Toczkiewicz, In situ evaluation of connection flexibility in a road bridge due to live loads , Roads and Bridges - Drogi i Mosty: Vol. 5 No. 4 (2006)
Mike Cedric Tcheutchoua Soh, Maël Sonna Donko, Emanuele Maiorana, Aeroelastic analysis of non-conventional and slender suspension bridges , Roads and Bridges - Drogi i Mosty: Vol. 23 No. 4 (2024)
Maria Marks, Application of machine learning to determine properties of concretes modified with addition of coal ash , Roads and Bridges - Drogi i Mosty: Vol. 9 No. 3 (2010)
Mieczysław Słowik, Przemysław Adamczak, Evaluation of short-term ageing influence on the properties of sbs elastomer modified road bitumens , Roads and Bridges - Drogi i Mosty: Vol. 6 No. 1 (2007)
Amin Bagherzadeh Azar, Ali Sari, Failure analysis of multi-span masonry arch bridges using combination of point cloud data and three-dimensional numerical modeling , Roads and Bridges - Drogi i Mosty: Vol. 23 No. 3 (2024)
Grzegorz Mazurek, Przemysław Buczyński, Marek Iwański, Artur Kowalczyk, Marcin Podsiadło, Prediction of irreversible susceptibility and elastic recurrence of asphalts modified with waste plastomers in MSCR study , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 4 (2023)
Lucjan Janas, Władysław Łakota, Analysis of posibilities of noise reduction in the vicinity of steel bridge and railway line , Roads and Bridges - Drogi i Mosty: Vol. 4 No. 2 (2005)
Ewelina Tkaczewska, Influence of partial replacement of cement CEM I 42.5R by milled limestone on the propeties of cement pastes and mortars , Roads and Bridges - Drogi i Mosty: Vol. 22 No. 2 (2023)
Lesław Kwaśniewski, Dynamic analysis of interaction between wheel and cover of precast concrete manhole , Roads and Bridges - Drogi i Mosty: Vol. 9 No. 1 (2010)

<< < 15 16 17 18 19 20

You may also start an advanced similarity search for this article.

Download files

PDF

Citation rules

Kalantari, M. (2023). Cold recycling with foamed bitumen, gained knowledge from a test track in Germany. Roads and Bridges - Drogi I Mosty, 22(4), 463–480. https://doi.org/10.7409/RABDIM.023.028

Cited by / Share

Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Wirtgen Cold Recycling Technology. Wirtgen, Windhagen, Germany, 2012
Google Scholar

Wacker B., Kalantari M., Diekmann M.: Cold Recycling in Germany-Current Experiences and Future Projects. in: Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements-Mairepav9. Lecture Notes in Civil Engineering, vol 76, 2020 DOI: https://doi.org/10.1007/978-3-030-48679-2_76
Google Scholar

Kalantari M.: Foamed Bitumen and Cement Stabilized Mixes – Characterisitics and Pavement Design. School of Science and Technology of the University of Siegen, Siegen, Germany, 2022
Google Scholar

Mollenhauer K.: Studie zum Anwendungspotenzial von werksgemischten Kaltbauweisen – Asphalt. Berichte der Bundesanstalt für Sraßenwessen (BASt), Straßenbau Heft S 114. Bergisch Gladbach, 2017
Google Scholar

Franz R.: Ökobilanzierung und dimensionierungstechnische Betrachtungen an KRC-Schichten. Lehrstuhl für Verkehrswegbau, Bochum, 2017
Google Scholar

Radenberg M., Miljkovic M., Schäfer V.: Einfluss des Asphalt-granulates auf die bemessungs-und ermüdungsrelevanten Materialeigenschaften einer zwangsgemischten, kaltgebundenen und bitumendominanten Tragschicht. Berichte der Bundesanstalt für Straßenwesen (BASt), Straßenbau Heft S 86. Bergisch Gladbach, 2015
Google Scholar

Bitumen Stabilized Materials, a guideline for the design and construction of Bitumen Emulsion and Foamed Bitumen Stabilized Materials. TG2 (3rd edition). Southern African Bitumen Association, Howard Place 7450, South Africa, 2020
Google Scholar

Wacker B., Jansen D.: Two Years of APT Program on the New Test Site duraBASt. in: Accelerated Pavement Testing to Transport Infrastructure Innovation. Proceedings of 6th APT Conference. Lecture Notes in Civil Engineering, 96, 2020, 32–39 DOI: https://doi.org/10.1007/978-3-030-55236-7_4
Google Scholar

Steyn W.: NCHRP Synthesis 433: Significant Findings from Full-Scale Accelerated Pavement Testing. Transportation Research Board, Washington, D.C., 2012 DOI: https://doi.org/10.17226/22699
Google Scholar

Wacker B., Jansen D.: Toolbox for APT program monitoring at BASt and optimized data handling on new test facility duraBASt. TRB Annual Meeting, 2018
Google Scholar

Richtlinien für die Standardisierung des Oberbaus von Verkehrsflächen: RStO 12. Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV), 2012
Google Scholar

Cold Recycling. Laboratory Handbook. Wirtgen, Windhagen, Germany, 2017
Google Scholar

Merkblat für Kaltrecycling in situ im Straßenoberbau, MKRC. Forschungsgesellschaft für Straßen- und Verkehrswesen Arbeitsgruppe Mineralstoffe im Straßenbau (FGSV), 2005
Google Scholar

Merkblatt für die Verwendung von pechhaltigen Straßenausbaustoffen und von Asphaltgranulat in bitumengebundenen Tragschichten durch kaltaufbereitung in Mischanlagen, M VB-K. Forschungsgesellschaft für Straßen- und Verkehrswesen Arbeitsgruppe Asphaltbauweisen (FGSV), 2007
Google Scholar

Jansen D.: Dynamic load plate tests. Calibration procedure for test equipments in Germany. in: Proceedings Ninth International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 25–7 June 2013, vol. 1
Google Scholar

Wacker B., Scherkenbach M., Jansen D.: Temperaturuntersuchungen am und im Mobile Load Simulator MLS30. Bundesanstalt für Straßenwesen (BASt), Straßenbau Heft S 120. Bergisch Gladbach, 2018
Google Scholar

Cold recycling with foamed bitumen, gained knowledge from a test track in Germany

Abstract

Keywords:

Similar Articles

Downloads

Mehdi Kalantari