Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function

Mahtisa Kivani; Ali Keyhani

doi:10.7409/rabdim.023.009

Published: 2023-06-30

Vol. 22 No. 2 (2023)

Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function

Mahtisa Kivani

, Ali Keyhani

Section: Articles

https://doi.org/10.7409/rabdim.023.009

Abstract

Identification and classification of structural failures is a vital aspect of bridge maintenance. When local structural damage is identified without delay, its repair is less expensive and problematic than in the case of general damage. To determine seismic vulnerability or post-seismic damage, structural health assessments are frequently performed on bridges, dams, and buildings. The aim of this study is to keep track of the overall health of the Veresk Railway Bridge, which has been in service for over 90 years. For this purpose, the structure was modeled in the ABAQUS finite element software. Mode shapes of the structure were then extracted, the positions were determined as maximum points using MATLAB software, and a wavelet function was applied to these shapes. The results showed that the wavelet function is highly accurate and its results are close to the real values measured for the bridge.

Keywords:

ABAQUS, precision instruments, Veresk Bridge, wavelet function.

Similar Articles

Henryk Zobel, Artur Zbiciak, Radosław Oleszek, Rafał Michalczyk, Przemysław Mossakowski, Numerical identification of the dynamic characteristics of a steel-concrete railway bridge , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 3 (2014)
Mateusz Rajchel, Tomasz Siwowski, Live load transverse distribution in a road slab-girder bridge made of FRP composite girders , Roads and Bridges - Drogi i Mosty: Vol. 16 No. 2 (2017)
Czesław Machelski, Parameters of load transverse distribution across bridges , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 2 (2014)
Mehdi Dezfuli Nezhad, Reza Raoufi, Ahmad Dalvand, Resilience-based multi-objective optimization for determining the optimal sequence of bridge retrofit projects , Roads and Bridges - Drogi i Mosty: Vol. 21 No. 4 (2022)
Wojciech Bańkowski, Renata Horodecka, Marcin Gajewski, Krzysztof Mirski, The extended assessment of warm mix asphalts durability , Roads and Bridges - Drogi i Mosty: Vol. 15 No. 2 (2016)
Piotr Radziszewski, Jerzy Piłat, Michał Sarnowski, Karol J. Kowalski, Jan B. Król, Influence of high temperature on properties of materials used in bridge asphalt pavement structures , Roads and Bridges - Drogi i Mosty: Vol. 14 No. 3 (2015)
Aleksandr Ganyukov, Adil Kadyrov, Kyrmyzy Balabekova, Bakyt Kurmasheva, Tests and calculations of structural element of temporary bridges , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 3 (2018)
Cezary Kraszewski, Leszek Rafalski, Michał Ćwiąkała, Marcin Dreger, Effect of applied stress increments of the secondary deformation modulus and the ratio between the secondary and primary moduli of sandy gravel and crushed aggregate in static plate load tests , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 4 (2020)
Adam Zofka, Dominika Maliszewska, Maciej Maliszewski, Jacek Boratyński, Application of FTIR ATR method to examine the polymer content in the modified bitumen and to assess susceptibility of bitumen to ageing , Roads and Bridges - Drogi i Mosty: Vol. 14 No. 3 (2015)
Łukasz Topczewski, Juliusz Cieśla, Assessment of load bearing capacity of reinforced concrete bridge on the base of NDT results , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 2 (2014)

<< < 1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Download files

PDF

Citation rules

Kivani, M., & Keyhani, A. (2023). Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function. Roads and Bridges - Drogi I Mosty, 22(2), 181–199. https://doi.org/10.7409/rabdim.023.009

Cited by / Share

Licence

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Fabozzi S., Licata V., Autuori S., Bilotta E.: Prediction of the seismic behavior of an underground railway station and a tunnel in Napoli. Underground Space, 2, 2, 2017, 45-61, DOI: 10.1016/j.undsp.2017.03.005 DOI: https://doi.org/10.1016/j.undsp.2017.03.005
Google Scholar

Omenzetter P., Brownjohn J.M.W.: Application of time series analysis for bridge monitoring. Smart Materials and Structures, 15, 1, 2006, 129-138, DOI: 10.1088/0964-1726/15/1/041 DOI: https://doi.org/10.1088/0964-1726/15/1/041
Google Scholar

Glisic B., Inaudi D.: Fibre Optic Methods for Structural Health Monitoring. John Wiley & Sons, Chichester, 2007 DOI: https://doi.org/10.1002/9780470517819
Google Scholar

Manouchehrian A., Cai M.: Simulation of unstable rock failure under unloading conditions. Canadian Geotechnical Journal, 53, 1, 2016, 22-34, DOI: 10.1139/cgj-2015-0126 DOI: https://doi.org/10.1139/cgj-2015-0126
Google Scholar

Seyedpoor S.M., Yazdanpanah O.: An efficient indicator for structural damage localization using the change of strain energy based on static noisy data. Applied Mathematical Modelling, 38, 9-10, 2014, 2661-2672, DOI: 10.1016/j.apm.2013.10.072 DOI: https://doi.org/10.1016/j.apm.2013.10.072
Google Scholar

Yang H., Xu F., Ma J., Huang K.: Strain modal-based damage identification method and its application to crane girder without original model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233, 4, 2019, 1299-1311, DOI: 10.1177/0954406218769924 DOI: https://doi.org/10.1177/0954406218769924
Google Scholar

Ma J., Kharboutly H., Benali A., Ben Amar F., Bouzit M.: Joint angle estimation with accelerometers for dynamic postural analysis. Journal of Biomechanics, 48, 13, 2015, 3616-3624, DOI: 10.1016/j.jbiomech.2015.08.008 DOI: https://doi.org/10.1016/j.jbiomech.2015.08.008
Google Scholar

Sanchez J.C.: Evaluation of Structural Damage Identification Methods Based on Dynamic Characteristics. Ph.D. Dissertation, Department of Civil Engineering, University of Puerto Rico, 2005
Google Scholar

Park B., Sohn H., Yeum C.M., Truong T.C.: Laser ultrasonic imaging and damage detection for a rotating structure. Structural Health Monitoring, 12, 5-6, 2013, 494-506, DOI: 10.1177/1475921713507100 DOI: https://doi.org/10.1177/1475921713507100
Google Scholar

Kaloop M.R., Elbeltagi E., Hu J.W.: Recent Advances of Structures Monitoring and Evaluation Using GPS-Time Series Monitoring Systems: A Review. International Journal of Geo-Information, 6, 12, 2017, 382, DOI: 10.3390/ijgi6120382 DOI: https://doi.org/10.3390/ijgi6120382
Google Scholar

Abou-Galala M., Rabah M., Kaloop M., Zidan Z.M.: Assessment of the accuracy and convergence period of Precise Point Positioning. Mansoura Engineering Journal, 57, 2, 2016, 1-5, DOI: 10.21608/bfemu.2020.98819 DOI: https://doi.org/10.21608/bfemu.2020.98819
Google Scholar

Yigit C.O., Gurlek E.: Experimental testing of high-rate GNSS precise point positioning (PPP) method for detecting dynamic vertical displacement response of engineering structures. Geomatics Natural Hazards and Risk, 8, 2, 2017, 893-904, DOI: 10.1080/19475705.2017.1284160 DOI: https://doi.org/10.1080/19475705.2017.1284160
Google Scholar

Geng J., Meng X., Dodson A.H., Ge M., Teferle F.N.: Rapid re-convergences to ambiguity-fixed solutions in precise point positioning. Journal of Geodesy, 84, 12, 2010, 705-714, DOI: 10.1007/s00190-010-0404-4 DOI: https://doi.org/10.1007/s00190-010-0404-4
Google Scholar

Ge M., Gendt G., Rothacher M.A., Shi C., Liu J.: Resolution of GPS carrier-phase ambiguities in precise point positioning (PPP) with daily observations. Journal of Geodesy, 82, 7, 2008, 389-399, DOI: 10.1007/s00190-007-0187-4 DOI: https://doi.org/10.1007/s00190-007-0187-4
Google Scholar

Li W., Kong Q., Ho S.C.M., Mo Y.L., Song G.: Feasibility study of using smart aggregates as embedded acoustic emission sensors for health monitoring of concrete structures. Smart Materials and Structures, 25, 11, 2016, ID article: 115031, DOI: 10.1088/0964-1726/25/11/115031 DOI: https://doi.org/10.1088/0964-1726/25/11/115031
Google Scholar

Dehghani E., Zadeh M.N., Nabizadeh A.: Evaluation of seismic behavior of railway bridges considering track-bridge interaction. Roads and Bridges – Drogi i Mosty, 18, 1, 2019, 51-66, DOI: 10.7409/rabdim.019.004
Google Scholar

Xia Q., Cheng Y.Y., Zhang J., Zhu F.Q.: In-service condition assessment of a long-span suspension bridge using temperature-induced strain data. Journal of Bridge Engineering, 22, 3, 2017, ID article: a04016124, DOI: 10.1061/(ASCE)BE.1943-5592.0001003 DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0001003
Google Scholar

Ni Y.Q., Xia Y.X.: Strain-based condition assessment of a suspension bridge instrumented with structural health monitoring system. International Journal of Structural Stability and Dynamics, 16, 4, 2016, ID article: 1640027, DOI: 10.1142/S0219455416400277 DOI: https://doi.org/10.1142/S0219455416400277
Google Scholar

Khordmand S.A., Selajgeh M.: Determining damage in bending plates by wavelet method and its severity. Master’s thesis, Shahid Bahonar University, Kerman, 2018
Google Scholar

Haynes C., Todd M.: Enhanced damage localization for complex structures through statistical modelling and sensor fusion. Mechanical Systems and Signal Processing, 54-55, 2015, 195-209, DOI: 10.1016/j.ymssp.2014.08.015 DOI: https://doi.org/10.1016/j.ymssp.2014.08.015
Google Scholar

Xiao C., Qu W.L., Tan D.M.: An application of data fusion technology in structural health monitoring and damage identification. Proceedings of SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 5758, 2005, 451-461, DOI: 10.1117/12.599783 DOI: https://doi.org/10.1117/12.599783
Google Scholar

Bao X., Xia Z., Ye G.: Numerical analysis on the seismic behavior of a large metro subway tunnel in liquefiable ground. Tunnelling and Underground Space Technology, 6, 6, 2017, 35-52, DOI: 10.1016/j.tust.2017.04.005 DOI: https://doi.org/10.1016/j.tust.2017.04.005
Google Scholar

Regulations of the technical and executive system of the Islamic Republic of Iran No. 139 – Standard Loads for Bridges (in Persian), 2000, https://shaghool.ir/Files/139-AeinNameBargozaryPolha.pdf (15.03.2023)
Google Scholar

Szafrański M.: Dynamic analysis of the railway bridge span under moving loads. Roads and Bridges – Drogi i Mosty, 17, 4, 2018, 299-316, DOI: 10.7409/rabdim.018.019
Google Scholar

Regulations of the technical and executive system of the Islamic Republic of Iran No. 308 – Guideline for Design of Retaining Walls, 2017 (in Persian), https://geoparsian.com/wp-content/uploads/2020/12/Code-308-1.pdf (15.03.2023)
Google Scholar

Mahtisa Kivani

mahtisakivani@gmail.com
https://orcid.org/0009-0009-8996-9910

Affiliation:

Islamic Azad University, Department of Civil Engineering, Shahroud Branch, Shahroud, Iran Iran, Islamic Republic of

Ali Keyhani

https://orcid.org/0000-0002-5544-0631

Affiliation:

Shahrood University of Technology, Faculty of Civil Engineering, Shahrood, P.O. Box: 3619995161, Iran Iran, Islamic Republic of

Health monitoring of the Veresk Bridge by comparing the results of precision instrument measurements and modelling with Abaqus software and wavelet function

Abstract

Keywords:

Similar Articles

Downloads

Mahtisa Kivani

Ali Keyhani