Investigations of resilient moduli of selected hydraulically bound mixtures (HBM) under cyclic load

Beata Gajewska; Marcin Gajewski; Cezary Kraszewski; Leszek Rafalski

doi:10.7409/rabdim.012.001

Published: 2012-04-01

Vol. 11 No. 4 (2012)

Investigations of resilient moduli of selected hydraulically bound mixtures (HBM) under cyclic load

Beata Gajewska , Marcin Gajewski , Cezary Kraszewski , Leszek Rafalski

Section: Articles

https://doi.org/10.7409/rabdim.012.001

Abstract

This paper presents the results of resilient moduli tests carried out on selected hydraulically bound mixtures (HBM). Both static and dynamic loading procedures were used. In total, thirteen hydraulically bound mixtures designed for construction of road base and subgrade improvement were tested. The mixtures were composed of crushed granite, dolomite or recycled concrete mixed with a hydraulic road binder, cement and two types of fly ash. The specimens were subjected to cyclic loading with 0.248 s and 50 s load times. Moreover, the specimens were subjected to compressive and tensile strength tests. The tests showed that the load duration had no significant effect on the obtained resilient modulus. This resulted from good linear correlation between the values obtained with the two load times, namely 0.248 s and 50 s. Non-linear relationships were established between the values of compressive and tensile strength and the resilient modulus. Some differences were noted in the shape of curves drawn for the respective granular materials and binders. This indicates that some physical ingredients may have an impact on the above-mentioned relationships.

Keywords:

aggregate, capping, compressive strength, hydraulically bound mixture, indirect tensile strength, resilient modulus, road base

Most read articles by the same author(s)

Cezary Kraszewski, Leszek Rafalski, Michał Ćwiąkała, Marcin Dreger, Effect of applied stress increments of the secondary deformation modulus and the ratio between the secondary and primary moduli of sandy gravel and crushed aggregate in static plate load tests , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 4 (2020)
Marcin Dreger, Mieczysław Przygoda, Cezary Kraszewski, Michał Mitrut, Leszek Rafalski, Mariusz Wojdal, Bentonite-loess slurry for construction of diaphragm walls and bored piles , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 2 (2020)
Marcin Gajewski, Renata Horodecka, Rheological properties of road bitumens modified by natural asphalt , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 2 (2018)
Wojciech Bańkowski, Marcin Gajewski, Accelerated loading tests in the full scale on innovative pavement structures , Roads and Bridges - Drogi i Mosty: Vol. 11 No. 2 (2012)
Marcin Gajewski, Comparison of rheological properties of chosen elastomers used in production of bridge bearings , Roads and Bridges - Drogi i Mosty: Vol. 16 No. 1 (2017)
Michał Ćwiąkała, Joanna Korzeniowska, Cezary Kraszewski, Aleksander Widuch, Soil stabilisation with the use of hydraulic road binders on the basis of brown coal fly ash , Roads and Bridges - Drogi i Mosty: Vol. 11 No. 3 (2012)
Cezary Kraszewski, Analysis of frost resistance test results for hydraulically bound mixtures , Roads and Bridges - Drogi i Mosty: Vol. 7 No. 3 (2008)
Mirosław Graczyk, Marcin Gajewski, Radosław Szczerba, Structural analysis of airfield concrete pavement with doweled joints taking into account curling of slabs , Roads and Bridges - Drogi i Mosty: Vol. 15 No. 2 (2016)
Michał Ćwiąkała, Joanna Korzeniowska, Cezary Kraszewski, Leszek Rafalski, Testing the concentration of trace metals in soils near roads with varied traffic intensity , Roads and Bridges - Drogi i Mosty: Vol. 18 No. 2 (2019)
Mirosław Graczyk, Józef Rafa, Leszek Rafalski, Adam Zofka, New analytical solution of flow and heat refraction problem in multilayer pavement , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 1 (2014)

1 2 3 > >>

Download files

PDF (Język Polski)

Citation rules

Gajewska, B., Gajewski, M., Kraszewski, C., & Rafalski, L. (2012). Investigations of resilient moduli of selected hydraulically bound mixtures (HBM) under cyclic load. Roads and Bridges - Drogi I Mosty, 11(4), 269–280. https://doi.org/10.7409/rabdim.012.001

Cited by / Share

References

PN-EN 13286-43 Mieszanki niezwiązane i związane spoiwem hydraulicznym - Część 43: Metoda oznaczania modułu sprężystości mieszanek związanych spoiwem hydraulicznym
Google Scholar

George K.P.: Prediction of resilient modulus from soil index properties. Final report. The University of Mississippi, Mississippi, 2004
Google Scholar

Hopkins T.C., Beckham T.L., Sun Ch., Ni B.: Resilient modulus of Kentucky soils. University of Kentucky, Kentucky, 2001
Google Scholar

PN-EN 14227-1 Mieszanki związane spoiwem hydraulicznym – Wymagania - Część 1: Mieszanki związane cementem
Google Scholar

PN-EN 14227-2 Mieszanki związane spoiwem hydraulicznym – Specyfikacje - Część 2: Mieszanki żużlowe
Google Scholar

PN-EN 14227-3 Mieszanki związane spoiwem hydraulicznym – Wymagania - Część 3: Mieszanki związane popiołami lotnymi
Google Scholar

PN-EN 14227-5 Mieszanki związane spoiwem hydraulicznym – Wymagania - Część 5: Mieszanki związane spoiwem drogowym
Google Scholar

AASHTO T274 Resilient Modulus of Unbound Granular Base/Subbase Materials and Subgrade Soils
Google Scholar

PN-EN 13286-7 Mieszanki niezwiązane i związane spoiwem hydraulicznym - Część 7: Próba cyklicznego obciążania trójosiowego mieszanek niezwiązanych (oryg.)
Google Scholar

Powell W.D., Potter J.F., Mayhew H.C., Nunn M.E.: The structural design of bituminous roads. TRRL Report, 1984
Google Scholar

ASTM D4123-82 Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
Google Scholar

PN-EN 12697-26 Mieszanki mineralno-asfaltowe - Metody badań mieszanek mineralno-asfaltowych na gorąco - Część 26: Sztywność
Google Scholar

Praca zbiorowa: Katalog Wzmocnień i Remontów Nawierzchni Podatnych i Półsztywnych KWRNPP-2001. IBDiM, 2001
Google Scholar

Praca zbiorowa: Badania i analiza porównawcza właściwości mieszanek związanych hydraulicznie według dotychczasowych norm PN i nowych norm PN-EN 14225:1÷5. IBDiM, Warszawa, 2007
Google Scholar

Edwards J.P.: Laboratory Characterisation of Pavement Foundation Materials. A dissertation thesis submitted in partial fulfillment of the requirements for the award of the degree Doctor of Engineering (EngD). Loughborough University, March, 2007
Google Scholar

Marrani A., Lancieri F.: Performance of cement stabilized recycled crushed concrete. First International Conference on Transport Infrastructure ICTI, Beijing, China, 2008
Google Scholar

Mechanistic–Empirical Pavement Design Guide (MEPDG). A Manual of Practice. American Association of State Highway and Transportation Officials, June, 2008
Google Scholar

PN-EN 13286-2 Mieszanki niezwiązane i związane spoiwem hydraulicznym - Część 2: Metody określania gęstości i zawartości wody - Zagęszczanie metodą Proctora
Google Scholar

Praca zbiorowa: Wymagania techniczne. Mieszanki związane spoiwem hydraulicznym. WT 5, IBDiM, 2010
Google Scholar

PN-EN 13286-41 Mieszanki niezwiązane i związane spoiwem hydraulicznym - Część 41: Metoda oznaczania wytrzymałości na ściskanie mieszanek związanych spoiwem hydraulicznym
Google Scholar

PN-EN 13286-42 Mieszanki niezwiązane i związane spoiwem hydraulicznym - Część 42: Metoda oznaczania wytrzymałości na rozciąganie pośrednie mieszanek związanych spoiwem hydraulicznym
Google Scholar

Beata Gajewska

bgajewska@ibdim.edu.pl

Affiliation:

Road and Bridge Research Institute, Warsaw

Marcin Gajewski

Affiliation:

Warsaw University of Technology, Faculty of Civil Engineering

Cezary Kraszewski

Affiliation:

Road and Bridge Research Institute, Warsaw

Leszek Rafalski

Affiliation:

Road and Bridge Research Institute, Warsaw

Investigations of resilient moduli of selected hydraulically bound mixtures (HBM) under cyclic load

Abstract

Keywords:

Similar Articles

Most read articles by the same author(s)

Downloads

Beata Gajewska

Marcin Gajewski

Cezary Kraszewski

Leszek Rafalski