Capacity assessment and modification of high noise barriers

Lesław Niewiadomski; Szymon Swierczyna; Walter Wuwer

doi:10.7409/rabdim.014.010

Published: 2014-04-01

Vol. 13 No. 2 (2014)

Capacity assessment and modification of high noise barriers

Lesław Niewiadomski , Szymon Swierczyna , Walter Wuwer

Section: Articles

https://doi.org/10.7409/rabdim.014.010

Abstract

Capacity assessment and modification of existing steel structure of high noise barriers in which imminent failure conditions occurs is developed in the article. Differences between design assumptions defined by Eurocode 3 and standards actual in the second half of XXth century could be the reason of underestimation of loads, which leads to lack of general stability of cantilever columns of the barrier. The structure and its technical condition, as well as conclusions of the performed analysis and methods of structure repair are shown in details.

Keywords:

high noise barrier bearing-capacity, noise barrier design, noise barrier modification, noise barrier supporting structure

Similar Articles

Gajendra Kumar, Umesh C. Sahoo, K. Ramachandra Rao, Sunil Bose, Design and evaluation of stone matrix asphalt using stiffer grade crumb rubber modified bitumen , Roads and Bridges - Drogi i Mosty: Vol. 18 No. 2 (2019)
Piotr Mackiewicz, Bartłomiej Krawczyk, Influence of loading time on subgrade parameters derived from VSS static plate test , Roads and Bridges - Drogi i Mosty: Vol. 14 No. 1 (2015)
Stefan Firlej, Jerzy Kukiełka, Load bearing capacity of a national road with base course made of mineral-cement-emulsion mixture after 12 years of exploitation , Roads and Bridges - Drogi i Mosty: Vol. 18 No. 3 (2019)
Michał A. Glinicki, Roman Jaskulski, Mariusz Dąbrowski, Design principles and testing of internal frost resistance of concrete for road structures - critical review , Roads and Bridges - Drogi i Mosty: Vol. 15 No. 1 (2016)
Krzysztof Gasz, An attempt to determine capacity of movements from minor entries in case of congestion on the major street , Roads and Bridges - Drogi i Mosty: Vol. 20 No. 2 (2021)
Daria Jóźwiak-Niedźwiedzka, Karolina Gibas, Michał A. Glinicki, Grzegorz Nowowiejski, Influence of high calcium fly ash on permeability of concrete in respect to aggressive media , Roads and Bridges - Drogi i Mosty: Vol. 10 No. 3 (2011)
Dariusz Sybilski, Wojciech Bańkowski, Laboratory research and full scale testing of high modulus asphalt concrete in road pavement , Roads and Bridges - Drogi i Mosty: Vol. 10 No. 1-2 (2011)
Seoyoung Cho, Éva Lakatos, Finite element and fatigue analysis of flexible pavements based on temperature profile modeling , Roads and Bridges - Drogi i Mosty: Vol. 21 No. 2 (2022)
Beata Gajewska, Marcin Gajewski, Cezary Kraszewski, Analysis of a flexible road pavement on a subgrade with an inclusion in the form of a pipeline running along the road axis , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 4 (2018)
Janusz Rymsza, Causes of the Morandi viaduct disaster in Genoa as a contribution to the design of pre-stressed structures , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 1 (2020)

<< < 1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Download files

PDF

Citation rules

Niewiadomski, L., Swierczyna, S., & Wuwer, W. (2014). Capacity assessment and modification of high noise barriers. Roads and Bridges - Drogi I Mosty, 13(2), 145–155. https://doi.org/10.7409/rabdim.014.010

Cited by / Share

References

PN-B-02011:1977 Obciążenia w obliczeniach statycznych. Obciążenie wiatrem
Google Scholar

PN-B-03200:1990 Konstrukcje stalowe. Obliczenia statyczne i projektowanie
Google Scholar

PN-EN 1993-1-1 Eurokod 3: Projektowanie konstrukcji stalowych. Część 1-1: Reguły ogólne i reguły dla budynków
Google Scholar

Niewiadomski L., Świerczyna Sz., Wuwer W.: Stan przedawaryjny wysokiego ekranu akustycznego. materiały XXVI Konferencji Naukowo-Technicznej „Awarie Budowlane 2013”, Szczecin, 259-266
Google Scholar

Specyfikacja Techniczna Wykonania i Odbioru Robót Budowlanych M.20.01.32 Ekrany z plexiglasu. Mosty Katowice Sp. z o.o.
Google Scholar

PN-EN 10025-2:2007 Wyroby walcowane na gorąco ze stali konstrukcyjnych. Część 2: Warunki techniczne dostawy stali konstrukcyjnych niestopowych
Google Scholar

Żurański J.A.: Obciążenia wiatrem budowli i konstrukcji. Arkady, Warszawa 1978
Google Scholar

PN-B-03215 Konstrukcje Stalowe. Połączenia z fundamentami. Projektowanie i wykonanie
Google Scholar

PN-B-03264:2002 Konstrukcje betonowe, żelbetowe i sprężone. Obliczenia statyczne i projektowanie
Google Scholar

PN-EN1794-1:2011 Drogowe urządzenia przeciwhałasowe. Wymagania pozaakustyczne. Część 1: Właściwości mechaniczne i stateczność
Google Scholar

PN-B-02011:1977/Az1 Obciążenia w obliczeniach statycznych. Obciążenie wiatrem (zmiana Az1, lipiec 2009)
Google Scholar

Design manual for Road and Bridges, Volume 10: Environmental Design and Management, Section 5: Environmental Barriers, Part 2 HA 66/95
Google Scholar

Lesław Niewiadomski

leslaw.niewiadomski@polsl.pl

Affiliation:

Silesian University of Technology, Faculty of Civil Engineering

Szymon Swierczyna

Affiliation:

Silesian University of Technology, Faculty of Civil Engineering

Walter Wuwer

Affiliation:

Silesian University of Technology, Faculty of Civil Engineering

Capacity assessment and modification of high noise barriers

Abstract

Keywords:

Similar Articles

Downloads

Lesław Niewiadomski

Szymon Swierczyna

Walter Wuwer