13, 3, 2014, 235-260
Influence of mixture composition on thermal properties of concrete and the performance of rigid pavement
Abstract
Keywords
References
AASHTO Guide for Design of Pavement Structures. American Association of State Highway and Transportation Officials, Washington, 1986
Mechanistic-Empirical Pavement Design Guide – A Manual of Practice. American Association of State Highway and Transportation Officials, Washington, 2008
ASTM C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate. ASTM International, West Conshohocken, 2013
ASTM C1045-07 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions. ASTM International, West Conshohocken, 2013
ASTM C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus. ASTM International, West Conshohocken, 2010
ASTM E1530-11 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique. ASTM International, West Conshohocken, 2011
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry. ASTM International, West Conshohocken, 2011
AASHTO T336-11. Coefficient of Thermal Expansion of Hydraulic Cement Concrete. American Association of State Highway and Transportation Officials, Washington, 2011
AASHTO TP60-00. Coefficient of Thermal Expansion of Hydraulic Cement Concrete. American Association of State Highway and Transportation Officials, Washington, 2000
ASTM C531-00 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes. ASTM International, West Conshohocken, 2000
ASTM C490-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete. ASTM International, West Conshohocken, 2011
ASTM D4611-08 Standard Test Method for Specific Heat of Rock and Soil. ASTM International, West Conshohocken, 2008
ASTM D2766-95 Standard Test Method for Specific Heat of Liquids and Solids. ASTM International, West Conshohocken, 1995
Zhang Y., Sun W., Liu S.: Study on the hydration heat of binder paste in high-performance concrete. Cement and Concrete Research, 32, 9, 2002, 1483-1488
Nocuń-Wczelik W.: Heat evolution in hydrated cementitious systems admixtured with fly ash. Journal of Thermal Analysis and Calorimetry, 65, 2, 2001, 613-619
Knor G., Glinicki M.A., Holnicki-Szulc J.: Determination of thermal parameters of hardening concrete by means of inverse problem solution. Roads and Bridges - Drogi i Mosty, 11, 4, 2012, 281-294
Knor G., Glinicki M.A., Holnicki-Szulc J., Ossowski A., Ranachowski Z.: Influence of calcareous fly ash on the temperature of concrete in massive elements during the first 72 hours of hardening. Roads and Bridges - Drogi i Mosty, 12, 1, 2013, 113-126
U.S. Bureau of Reclamation, Concrete Manual, 8th edition, 1988
Ghafoori N., Diawara H.: Influence of temperature on fresh performance of self-consolidating concrete. Construction and Building Materials, 24, 6, 2010, 946-955
Neville A.M.: Properties of concrete. Fourth Edition John Wiley & Sons, Inc., New York, 1997
Mackiewicz P.: Thermal stress analysis of jointed plane in concrete pavements. Applied Thermal Engineering, 73, 1, 2014, 1167-1174
Siwińska A., Garbalińska H.: Thermal conductivity coefficient of cement based mortars as air relative humidity function. Heat and Mass Transfer, 47, 9, 2011, 1077-1087
Kim K.H., Jeon S.E., Kim J.K., Yang S.: An experimental study on thermal conductivity of concrete. Cement and Concrete Research, 33, 3, 2003, 363-371
Jerman M., Keppert M., Výborný J., Černý R.: Hygric, thermal and durability properties of autoclaved aerated concrete. Construction and Building Materials, 41, 1, 2013, 352-359
Panesar D.K., Shindman B.: The mechanical, transport and thermal properties of mortar and concrete containing waste cork. Cement and Concrete Composites, 34, 9, 2012, 982-992
Kim H.K., Jeon J.H., Lee H.K.: Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air. Construction and Building Materials, 29, 2012, 193-200
Khaliq W., Kodur V.: Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures. Cement and Concrete Research, 41, 11, 2011, 1112-1122
Loser R., Münch B., Lura P.: A volumetric technique for measuring the coefficient of thermal expansion of hardening cement paste and mortar. Cement and Concrete Research, 40, 7, 2010, 1138-1147
Sellevold E.J., Bjřntegaard Ř.: Coefficient of thermal expansion of cement paste and concrete: Mechanisms of moisture interaction. Materials and Structures, 39, 9, 2006, 809-815
Rajabipour F., Weiss J.: Electrical conductivity of drying cement paste. Materials and Structures, 40, 10, 2006, 1143-1160
Bjontegard O., Sellevold E.J.: Interaction between thermal dilation and autogenous deformation in high performance concrete. Materials and Structures, 34, 5, 2001, 266-272
Yeon J.H., Choi S., Won M.C.: In situ measurement of coefficient of thermal expansion in hardening concrete and its effect on thermal stress development. Construction and Building Materials, 38, 2013, 306-315
Fu X., Chung D.D.L.: Effects of silica fume, latex, methylcellulose, and carbon fibers on the thermal conductivity and specific heat of cement paste. Cement and Concrete Research, 27, 12, 1997, 1799-1804
Zhang D., Li Z., Zhou J., Wu K.: Development of thermal energy storage concrete. Cement and Concrete Research, 34, 6, 2004, 927-934
Pomianowski M., Heiselberg P., Jensen R.L., Cheng R., Zhang Y.: A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM. Cement and Concrete Research, 55, 2014, 22-34
Kodide U., Shin A.H.: Effects of thermal properties on temperature and moisture profiles, and the performance of PCC pavements. Journal of Engineering and Applied Sciences, 6, 12, 2011, 88-96
Chung Y.: Thermal stress analysis of jointed plain concrete pavements containing fly ash and slag. PhD Thesis, Louisiana State University, 2012
Nantung T.: High Performance Concrete Pavement in Indiana. Joint Transportation Research Program, SPR-2642, Report No. FHWA/IN/JTRP-2011/20, 2011
Zhu B.: Thermal Stresses in Fixed Slab or Free Slab, in: Thermal Stresses and Temperature Control of Mass Concrete. Tsinghua University Press, 2014, 121-142
Yehia S., Landolsi T., Hassan M., Hallal M.: Monitoring of strain induced by heat of hydration, cyclic and dynamic loads in concrete structures using fiber-optics sensors. Measurement, 52, 2014, 33-46
Zou X., Chao A., Tian Y., Wu N., Zhang H., Yu T.Y., Wang X.: An experimental study on the concrete hydration process using Fabry-Perot fiber optic temperature sensors. Measurement, 45, 5, 2012, 1077-1082
Linek M., Nita P.: Thermal effects on airfield surfaces. 9-th European conference of young research and scientific workers. University of Żilina, Slovak Republic, Transcom 2011, 7, 2011, 85-88
Campbell-Allen D., Desai P.M.: The influence of aggregate on the behaviour of concrete at elevated temperatures. Nuclear Engineering and Design, 6, 1, 1967, 65-77
Bier T.A., Wise S., Chang P.: A mechanistic study of failure of concrete subjected to cyclic thermal loads. Naval Civil Engineering Laboratory, CR 91.008, Port Hueneme, CA 93043, USA, 1991
Sullivan P.J., Poucher M.P.: The influence of temperature on the physical properties of concrete and mortar in the range 20°C to 400°C. American Concrete Institute Special Publication, 25, 1971, 103-136