Fire test of FRP members applied for the renovation of a steel railway bridge

Kamila Cábová; Pavel Ryjáček; Ondřej Hráský; Ludvík Kolpaský; Jan Vůjtěch

doi:10.7409/rabdim.018.002

Published: 2018-03-30

Vol. 17 No. 1 (2018)

Fire test of FRP members applied for the renovation of a steel railway bridge

Kamila Cábová , Pavel Ryjáček , Ondřej Hráský , Ludvík Kolpaský , Jan Vůjtěch

Section: Articles

https://doi.org/10.7409/rabdim.018.002

Abstract

The paper outlines the on-site fire tests of FRP (fibre-reinforced polymer) products applied to a steel railway bridge. The bridge consisting of two main steel girders with a span of 9.9 m, and with timber sleepers was mounted with four different FRP floor panels on sleepers, consoles and railing systems. The FRP products differed in shape, and reaction-to-fire class. The results of the fire tests showed that only grate elements or grids with one or both coated surfaces could be accepted. Ribbed elements with the ribs oriented perpendicular to the axis of the sleepers might contribute to the progressive spread of fire to other sleepers. That is why these elements are not permitted for floors on sleepers. The shape of elements for railing construction is not limited from the viewpoint of fire safety. Good behaviour after fire can be achieved even with the profiles of reaction-to-fire class C, so it is not necessary to use fire-resistant gratings with phenol resin. The present paper concludes that FRP equipment has proved to be a suitable, durable and technically well-grounded replacement for standard steel materials for renovation of railway bridges.

Keywords:

class renovation, fibre-reinforced polymers, fire safety, fire test, steel railway bridge, reaction-to-fire

Similar Articles

Magdalena Wesołowska, Dawid Ryś, Analysis of the fatigue life of neat and modified bitumens using linear amplitude sweep test , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 4 (2018)
Paweł Kossakowski, Load-carrying capacity of steel railway bridges subjected to long term service according to Eurocode Standards , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 2 (2014)
Rohollah Rostami, Agnieszka J. Klemm, Influence of superabsorbent polymers on properties of fiber reinforced mortars containing fly ashes , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 2 (2020)
Salvatore Cafiso, Carmelo D'agostino, Mariusz Kieć, Giuseppina Pappalardo, Surrogate measure of safety from road inspection data - experimental test on Polish roads , Roads and Bridges - Drogi i Mosty: Vol. 16 No. 2 (2017)
Leszek Kornalewski, Monika Kowalska-Sudyka, Anna Ledwolorz, Proposal of post evaluation methodology for the impact of a new road investment project on road safety , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 3 (2020)
Marek Szafrański, Dynamic analysis of the railway bridge span under moving loads , Roads and Bridges - Drogi i Mosty: Vol. 17 No. 4 (2018)
Artur Duchaczek, Zbigniew Mańko, Application of the numerical methods to assessment of the fatigue life of steel military bridges , Roads and Bridges - Drogi i Mosty: Vol. 13 No. 1 (2014)
Cezary Kraszewski, Leszek Rafalski, Michał Ćwiąkała, Marcin Dreger, Effect of applied stress increments of the secondary deformation modulus and the ratio between the secondary and primary moduli of sandy gravel and crushed aggregate in static plate load tests , Roads and Bridges - Drogi i Mosty: Vol. 19 No. 4 (2020)
Peter Koteš, Miroslav Brodňan, Milan Chandoga, Tatiana Bacíková, Wojciech Kubissa, The Zlatné bridge - condition survey, temporary remedial works required due to dangerous condition and bridge restoration project , Roads and Bridges - Drogi i Mosty: Vol. 16 No. 3 (2017)
Juliusz Cieśla, Mirosław Biskup, Łukasz Topczewski, Marian Skawiński, Cases of failure of bridge structures during the process of pre-stressing , Roads and Bridges - Drogi i Mosty: Vol. 16 No. 1 (2017)

<< < 1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Download files

PDF

Citation rules

Cábová, K., Ryjáček, P., Hráský, O., Kolpaský, L., & Vůjtěch, J. (2018). Fire test of FRP members applied for the renovation of a steel railway bridge. Roads and Bridges - Drogi I Mosty, 17(1), 23–38. https://doi.org/10.7409/rabdim.018.002

Cited by / Share

References

Ryjacek P., et al.: Application of FRP materials for a renovation of steel railway bridges. Proceedings of the 8th International Conference on Bridge Maintenance, Safety and Management, Foz do Iguacu, Brazil, 2016
Google Scholar

Ryjacek P., et al.: Application of FRP materials for railway bridges and tunnels. Research report, Czech Technical University in Prague, 2015
Google Scholar

Cabova K.: Fire test of FRP members applied to railway bridge. Proceedings of the 9th International Conference on Structures in Fire, Princeton, USA, 2016, 784-790
Google Scholar

EN 13501-1:2007 Fire classification of construction products and building elements, Part 1: Classification using data from reaction-to-fire tests. CEN
Google Scholar

Zhao X-L., Zhang L.: State-of-the-art review of FRP strengthened steel structures. Engineering Structures, 29, 8, 2007, 1808-1823
Google Scholar

Bisby L.A.: ISIS Educational Module 8: Durability of FRP Composites for Construction. ISIS Canada, A Canadian Network of Centres of Excellence, 2006
Google Scholar

Davalos J.F., Chen A., Zou B.: Performance of a scaled FRP deck-on-steel girder bridge model with partial degree of composite action. Engineering Structures, 40, 8, 2012, 51-63
Google Scholar

Karbhari V.M. (Ed.): Rehabilitation of Metallic Civil Infrastructure Using Fiber Reinforced Polymer (FRP) Composites, Types Properties and Testing Methods. Elsevier, Woodhead Publishing, 2014
Google Scholar

Clarke J.L. (Ed.): Structural Design of Polymer Composites. EUROCOMP - Design Code and Handbook. The European Structural Polymeric Composites Group, EiFN SPON, London, UK, 1996
Google Scholar

Ascione L., Gutierrez E., Dimova S., Pinto A., Denton S. (Eds.): Prospect for new guidance in the design of FRP. EC Joint Research Centre, Scientific and Technical Report No. 27666 EN, European Union, 2016
Google Scholar

BD90/05 Design of FRP Bridges and Highway Structures, The Highways Agency, Scottish Executive, Welsh Assembly Government, the Department for Regional Development Northern Ireland, May 2005
Google Scholar

CNR-DT 205/2007 Guide for the Design and Construction of Structures made of Pultruded FRP elements. Italian National Research Council, October 2008
Google Scholar

CUR 96 Fibre Reinforced Polymers in Civil Load Bearing Structures. Dutch Recommendation, 2003
Google Scholar

Hrasky O.: Fiber-reinforced polymers at elevated temperature. Diploma thesis. Czech Technical University in Prague, 2016
Google Scholar

CSN EN 1147:2001 Portable ladders for fire fighters. Czech Standard
Google Scholar

Ryjacek P., et al.: MVL 725 - Application of FRP composites for equipment of railway bridge, Praha, 2016
Google Scholar