Roads and Bridges - Drogi i Mosty
21, 1, 2022, 63-79

Evaluating the effect of aggregate size, cement content and water-cement ratio on performance of pervious concrete

Mehrtash Soltani Mail
Arak Universum, Faculty of Engineering, Shahid Beheshti Street, 38156879 Arak, Iran
Reza Moayedfar Mail
Arak Universum, Faculty of Engineering, Shahid Beheshti Street, 38156879 Arak, Iran
Polim Chan Yi Wen Mail
University of Malaya, Department of Civil Engineering, Center for Transportation Research, 50603 Kuala Lumpur, Malaysia
Published: 2022-03-31

Abstract

Flash floods belong to the worst natural disasters and cause serious economic damage every year. Hence, use of pervious pavements in order to reduce surface runoff and allow the water to penetrate the soil is an important factor in flooding reduction. The main objective of the paper is to study the influence of various parameters, such as water-cement ratio (0.32, 0.35 and 0.38), cement content (350 kg/m3, 450 kg/m3 and 550 kg/m3) and aggregate size (2.83 mm, 5.66 mm and 8.00 mm), on the properties of pervious concrete in terms of water permeability, porosity and compressive strength. The obtained results revealed that aggregate size had the most significant effect on water permeability of pervious concrete. When a fixed water-cement ratio was considered, lower cement content provided higher porosity. Both in water permeability and porosity tests the highest values were observed for aggregate size of 8.00 mm. However, the results of the compressive strength test reached the highest value for the mixture with aggregate size of 5.66 mm, water-cement ratio of 0.35 and cement content of 550 kg/m3.

Keywords


compressive strength, concrete mix design, permeability, permeable concrete, porosity.

Full Text:

PDF PDF PDF

References


Mackiewicz P., Szydło A., Krawczyk B.: Influence of the construction technology on the texture and roughness of concrete pavements. Roads and Bridges - Drogi i Mosty, 17, 2, 2018, 111-126, DOI: 10.7409/rabdim.018.007

Yang J., Jiang G.: Experimental study on properties of pervious concrete pavement materials. Cement and Concrete Research, 33, 3, 2003, 381-386, DOI: 10.1016/S0008-8846(02)00966-3

Scholz M., Grabowiecki P.: Review of permeable pavement systems. Building and Environment, 42, 11, 2007, 3830-3836, DOI: 10.1016/j.buildenv.2006.11.016

Tennis P.D., Leming M.L., Akers D.J.: Pervious concrete pavements. Portland Cement Association, Skokie, 2004

Shu X., Huang B., Wu H., Dong Q., Burdette E.G.: Performance comparison of laboratory and field produced pervious concrete mixtures. Construction and Building Materials, 25, 8, 2011, 3187-3192, DOI: 10.1016/j.conbuildmat.2011.03.002

Lian C., Zhuge Y.: Optimum mix design of enhanced permeable concrete – an experimental investigation. Construction and Building Materials, 24, 12, 2010, 2664-2671, DOI: 10.1016/j.conbuildmat.2010.04.057

Nguyen D.H., Sebaibi N., Boutouil M., Leleyter L., Baraud F.: A modified method for the design of pervious concrete mix. Construction and Building Materials, 73, 2014, 271-282. DOI: 10.1016/j.conbuildmat.2014.09.088

Schulze J.: Influence of water-cement ratio and cement content on the properties of polymer-modified mortars. Cement and Concrete Research, 29, 6, 1999, 909-915, DOI: 10.1016/S0008-8846(99)00060-5

Kanadasan J., Razak H.A.: Mix design for self-compacting palm oil clinker concrete based on particle packing. Materials & Design, 56, 2014, 9-19, DOI: 10.1016/j.matdes.2013.10.086

Zaetang Y., Wongsa A., Sata V., Chindaprasirt P.: Use of lightweight aggregates in pervious concrete. Construction and Building Materials, 48, 2013, 585-591, DOI: 10.1016/j.conbuildmat.2013.07.077

ASTM C192 / C192M-19. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, 2019

Nguyen D.H., Boutouil M., Sebaibi N., Leleyter L., Baraud F.: Valorization of seashell by-products in pervious concrete pavers. Construction and Building Materials, 49, 2013, 151-160, DOI: 10.1016/j.conbuildmat.2013.08.017

Kuo W.T., Liu C.C., Su D.S.: Use of washed municipal solid waste incinerator bottom ash in pervious concrete. Cement and Concrete Composites, 37, 2013, 328-335, DOI: 10.1016/j.cemconcomp.2013.01.001

Sata V., Wongsa A., Chindaprasirt P.: Properties of pervious geopolymer concrete using recycled aggregates. Construction and Building Materials, 42, 2013, 33-39, DOI: 10.1016/j.conbuildmat.2012.12.046

Tho-in T., Sata V., Chindaprasirt P., Jaturapitakkul C.: Pervious high-calcium fly ash geopolymer concrete. Construction and Building Materials, 30, 2012, 366-371, DOI: 10.1016/j.conbuildmat.2011.12.028

Mishra K., Zhuge Y., Karunasena K.: Clogging mechanism of permeable concrete: A review. Concrete 2013: Understanding Concrete, Gold Coast, Australia, 2013, https://eprints.usq.edu.au/24554/ (25.03.2022)

Neithalath N., Sumanasooriya M. S., Deo O.: Characterizing pore volume, sizes, and connectivity in pervious concretes for permeability prediction. Materials Characterization, 61, 8, 2010, 802-813, DOI: 10.1016/j.matchar.2010.05.004

Sonebi M., Bassuoni M.: Investigating the effect of mixture design parameters on pervious concrete by statistical modelling. Construction and Building Materials, 38, 2013, 147-154, DOI: 10.1016/j.conbuildmat.2012.07.044

Yahia A., Kabagire K.D.: New approach to proportion pervious concrete. Construction and Building Materials, 62, 2014, 38-46, DOI: 10.1016/j.conbuildmat.2014.03.025

Haselbach L.M., Valavala S., Montes F.: Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems. Journal of Environmental Management, 81, 1, 2006, 42-49, DOI: 10.1016/j.jenvman.2005.09.019

Rehder B., Banh K., Neithalath N.: Fracture behavior of pervious concretes: the effects of pore structure and fibers. Engineering Fracture Mechanics, 118, 2014, 1-16, DOI: 10.1016/j.engfracmech.2014.01.015


Evaluating the effect of aggregate size, cement content and water-cement ratio on performance of pervious concrete

  
Soltani, Mehrtash; Moayedfar, Reza; Yi Wen, Polim Chan. Evaluating the effect of aggregate size, cement content and water-cement ratio on performance of pervious concrete. Roads and Bridges - Drogi i Mosty, [S.l.], v. 21, n. 1, p. 63-79, mar. 2022. ISSN 2449-769X. Available at: <>. Date accessed: 03 Dec. 2022. doi:http://dx.doi.org/10.7409/rabdim.022.004.